Sedus crossline Mode D'emploi page 9

E
Adjusting the seat tilt (optional)
To tilt the seat forwards:
P
1. Stand up
2. Pull the lever upwards, the seat
will rise automatically,
releasing the lever at the
required seating angle will lock
the position
To return the seat to horizontal:
P
Stand up
1.
2. Pull the lever upwards, sit down
on the seat and return to the
normal, horizontal position
C
H
F
Depth of the seat (optional)
Increasing the depth of the
P
seat:
1. Pull the lever upwards
2. Sit on the seat and in doing so
push the cushion into the
desired position
3. Release the lever, the seat locks
Decreasing the depth of the
P
seat:
1. Stand up
2. Pull the lever upwards
3. The cushion returns to the
normal position automatically
4. Release the lever, the seat locks
F A
D
G
Adjusting the multifunction
armrests (optional)
To adjust the height of the
P
armrests:
1. Press and hold the button
2. Raise or lower the armrest to
the desired height
3. Release the button to lock
the armrest
To adjust the depth of the
P
armrests:
slide the armrest cover back-
wards or forwards; it will lock
in place automatically
Sitting width between
P
the armrests
Press the lever down
1.
2. Slide the armrest into the
desired position
3. Pull the lever upwards
and fold away
H
Adjusting the aluminium
armrests (optional)
To adjust the sitting width
P
between the armrests:
1. Slightly loosen the two screws
on the armrest support under
the seat
2. Slide the armrest into the
desired position
3. Tighten the screws back up
English 9