Operation - Oase Jumping Jet Rainbow Star Set Notice D'emploi

- GB -
Pos: 132 /Alle Produkte/Überschriften/H1 Bedienung @ 7\mod_1196625148604_121.doc @ 41443
7.

Operation

Pos: 133 /Pumpen/Schlammsauger/Jumping Jet Rainbow Star/BED Beschreibung @ 7\mod_1196630317947_121.doc @ 41833
5 basic programs can be activated with the 12V Master control box, allowing you to run various anima-
tions on the Jumping Jet Rainbow Star. Each basic program can be activated at the manual transmitter
by a dedicated button.
Basic programs 1 to 4
►
The main functions of these basic programs, such as, for instance, chaselight or pulsed jet are pro-
grammed as a default. The different colours (blue, turquoise, yellow, red, white, green) of the jet
lighting also change according to a defined cycle. In addition, you can set the jet lighting to a desired
colour or switch it off altogether.
Basic program 5
►
This program is of a random play nature. All functions are automatically activated and alternate. You
cannot set one steady colour or deactivate the colour. However, you can accelerate or decelerate
the speeds of the program's progress.
Pos: 134 /Alle Produkte/Dummy_module/Abstand 6 pt @ 7\mod_1196627997106_0.doc @ 41651
Pos: 135 /Pumpen/Schlammsauger/Jumping Jet Rainbow Star/BED Beispiel @ 7\mod_1196630403323_121.doc @ 41859
Example
You want to set the "red" colour for an uninterrupted jet with chaselight.
1. Press the [2] button.
The colours pass through in succession.
2. Wait until the "red" colour appears in the water jet.
3. Now set the colour by briefly pressing the [–] button.
Pos: 136 /Alle Produkte/Dummy_module/Abstand 6 pt @ 7\mod_1196627997106_0.doc @ 41651
Pos: 137 /Pumpen/Schlammsauger/Jumping Jet Rainbow Star/BED Übersicht der Programmfunktionen @ 7\mod_1196630525401_121.doc @ 41885
Review of the program functions
Button
blue
turquoise
yellow
red
white
green
[–] (1 × short) Additional function
[–] (1 × long)
[+] (1 × long)
Pos: 138 /Alle Produkte/Dummy_module/===== Seitenwechsel ===== @ 0\mod_1125648978015_0.doc @ 1631
24
Note! The function will be activated as soon as the button concerned is released.
Selecting a basic program
You start or change to the basic program concerned by briefly pressing one of the buttons 1 to 5. Any
−
additional functions set will be reset.
Activating additional functions for basic programs 1 to 4
Setting the colour: Wait until the desired colour appears in the water jet, then press the [–] button.
−
Allow the colours to run through one after the other: Press the [+] button.
−
Switch off the light: Keep the [+] button pressed for 2 sec.
−
Activating additional functions for basic program 5
Double the play speed: Press the [+] button.
−
Halve the play speed: Press the [–] button.
−
Switching of the Jumping Jet Rainbow Star
Switch off water jet and light: Press the [6] button.
−
[1] [2]
Uninter- Jet section
rupted jet
Light colour Light colour
changes at changes at 4
4 sec inter- sec intervals
vals
The light colour currently shown in the basic program can be set
by pressing the button
Switch off the light
The light colour changes again at the 4 sec. interval
[3] [4]
Uninterrupted Jet section and
jet and chaselight
chaselight
Light colour Light colour
changes at 4 changes at 4
sec intervals sec intervals
[5] [6]
Ramdom play, all Switch off
functions change water jet and
cyclically light
Halve the play
speed
Double the play
speed