Advanced Operation; Preset Programmes; Chronothermostat Programming - Bticino Polyx Clima Manuel D'utilisation

Preset Programmes


The chronothermostat is provided with two preset programmes – a win-
ter and a summer programme – so that it can be promptly operated.

Chronothermostat programming


It is possible to customize the temperature profiles of the Automa-
tic and Holiday operations so as to adjust them according to your
needs. To set the new temperature profiles, do the following:
1 - Go to the main page of the programming menu. The opera-
tion mode being used will be temporarily stopped. Select the
customization function of the temperature profiles.

Advanced operation

2 -The Monday profile will appear (DAY 1) for the Winter opera-
tion mode ( icon). Use the
segment of the bar chart to the time you need to change the
Inverno Estate
temperature. Every segment is equal to half an hour. To change
the Summer mode profile (
key on the left side of the chronothermostat.
3 - Use the e keys to change the temperature level (T1, T2
p q
or T3).
4 - To directly duplicate the temperature profile thus moving to
the next day, press COPY (to customize each day separately,
see paragraph 5).
5 - Press ENTER to move to the following day and repeat the steps
from paragraph 2 for the other days of the week; the Holiday
profile is shown as DAY 8. To return to the main page of the
programming menu, scroll all eight days using the ENTER key
or hold down ENTER for 3 seconds.
If no key is pressed for more than three minutes, the chronother-
mostat will return to the previously used operation mode.
39
keys and move the flashing
t u
icon) press the Summer/Winter
Inverno Estate
GB
3