Signalling; Basic Operation; Your Timer Thermostat: Use It Immediately; Setting The Day And Time - Bticino Polyx Clima Manuel D'utilisation

Signaling

11
14 1
10
9
8
7
13 12 11
1 - Time
2 - Temperature profile
3 - Temperature value T1 or du-
ration, in days, of the Jolly
operation mode
4 - Temperature value T2 or du-
ration, in hours, of the Jolly
operation mode
5 - Temperature value T3
6 - System ON in summer opera-
tion mode
7 - System ON in winter operation
mode
2 3 4 5
10 9 8 7 6
8 - Percentage of relative
humidity
9 - Perceived temperature, di-
splayed to the degree
10 - Outside / room temperature
11 - Current day (1 = Monday... 7 =
Sunday; 8 = Holiday)
12 - Winter operation mode
13 - Summer operation mode
14 - Battery charge level

Basic operation

Your timer thermostat: use it immediately!

■
To operate the chronothermostat after its installation, carry out
the following operations in the order given:
1 - Set the day and time.
2 - Select the Summer / Winter operation mode.
3 - Choose the operation mode.

Setting the day and time


To set the current time and day, do the following:
1 - Go to the main page of the programming menu. The operation
mode being used will be temporarily stopped. Select the Set
time function.
2 - Change the time using keys p and q and then the minutes
using the key
u
35
GB
2