For Your Safety; Tool Specifications; Intended Use; Machine Elements - Würth 0995 000 000 Notice D'utilisation

Teilereiniger.book Seite 8 Donnerstag, 26. Juni 2008 10:44 10
GB
Working safely with this machine
is possible only when the operat-
ing and safety information are
read completely and the instruc-
tions contained therein are strictly
followed.
Danger of accidents! The machine
must be set up level and positioned
firmly on a suitable surface. Level
out any irregularities with appro-
priate shims or similar.
Danger of explosion! Cleaning
agents containing easily inflam-
mable materials may not be used.
Use only Würth cleaning agents ap-
proved for this machine.

Tool Specifications

Parts cleaner
Order number
Power consumption
Mains supply
Line fuse
Heating capacity
Loading capacity, max.
Tank volume (filling quantity
of cleaning agent)
Usable workspace
Level switch, warning range
Operating temperature
Pump flow rate
Dimensions (L x W x H)
Weight (without accessories),
approx.
Protection class

Intended Use

The parts cleaner is intended for cleaning objects
contaminated with oil and grease using Würth
cleaning agent, Art. No. 0995 000 001.
When using other cleaning agents, any and all lia-
bility is exempt.
8

For Your Safety

Observe the operating instructions and the
danger notes on the label of the cleaning agent.
Faulty usage can lead to material damage or
damage to one's health.
Contact with the cleaning agent can lead to skin
irritations. When working and filling, always
wear protective gloves, protective goggles and
suitable protective clothing.
Dispose of used cleaning agent in accordance
with regulations.
The electrical installation must be carried out
according to VDE 0100. For safety reasons, the
device may only be operated when a residual
current device (RCD) with a tripping current of
30 mA is connected in series.
Please have this checked by a qualified electri-
cian.
According to BGV A3, electrical operating
equipment is to be checked in regular intervals.
For further notes on safety refer to enclosed sheet
0995 000 000
1100 W
230 V (1N/PE)
10 A
1000 W
250 kg
10 Temperature sensor
100 l
11 Fuses
930 x 545 mm
12 Control system
< 60 l
13 Type plate
42 °C
14 Base unit with tank
200 l/h
15 Drain cock
1015 x 770 x 1215
16 Filter unit
17 Washer pump
70 kg
18 Flexible hose with flat nozzle
IP 54
I /
19 Shut-off and switching valve
20 Display
21 Multiple pushbutton
22 Heating LED

Machine Elements

1 Lid
2 Plug
3 Sieve (coarse)
4 Brush
5 Sieve (fine)
6 Cleaning basin
7 Heating element
8 Level switch
9 Air-bubbling unit