Declaration Of Conformity - Würth 0995 000 000 Notice D'utilisation

Masquer les pouces Voir aussi pour 0995 000 000:

Manuel d'utilisation (16 pages)

Table Des Matières

Table des Matières

Les langues disponibles

Teilereiniger.book Seite 11 Donnerstag, 26. Juni 2008 10:44 10

Overheating

When inadmissibly exceeding the max. normal temperature (42 °C), the temperature reading, as a warning

indication, is shown flashing on the display. In this case, the parts cleaner must be switched off immediately.

Afterwards, check the correct position of the PT 100 temperature sensor (10). In order to avoid damage

caused by overheating, the device is equipped with a temperature protector, which switches off the heating

system when exceeding a certain maximum temperature.

If the cause of the overheating is not due to an incorrect position of the temperature sensor, please inform

a service technician.

Warranty

For this Würth machine, we provide a warranty in

accordance with statutory/country-specific regula-

tions from the date of purchase (proof of purchase

by invoice or delivery note). Damage that has oc-

curred will be corrected by replacement or repair.

Damage caused by normal wear, overloading or

improper handling is excluded from the warranty.

Claims can only be accepted if the power tool is sent

undisassembled to a Würth branch office, your

Würth sales representative or a customer service

agent for Würth compressed-air and power tools.

Power tools, accessories and packaging should be

sorted for environmental-friendly recycling.

corporation into national law, power tools that are

no longer suitable for use must be separately collect-

ed and sent for recovery in an environmental-friend-

ly manner.