VITRA AQUACARE Guide Utilisateur page 17

to clean the interior of the injector, the injector is taken out from its place by pulling it upwards.
The cartridge inside the injector is pulled and removed by turning it counter-clockwise by
means of a pliers. The cartridge is cleaned by means of water. The disassembly of the parts
inside the cartridge causes the injector not to function. These parts should not be
disassembled. The cleaned cartridge is inserted into the injector and fitted into its place by
turning it clockwise. The injector is made fit into its place by pressing it towards to the toilet
bowl. Aquacare protection covers are also fit into their places as described in the user manual.
ed from its nails
driver.
The rear cover is pulled from its nails
by means of a screwdriver.
2 ea. front cover screws on the sides are removed.
The rear cover is taken
The rear cover is taken out from its place.
The front cover is taken out from its place.
16