BST SYMBOL-250 Manuel D'utilisation page 11

SYMBOL-250
47. BALANCED MASTER OUTPUT
Balanced output. Connect it to the inputs of the main power amplifier.
48. AC SOCKET + FUSE
Plug the AC power cord into any standard AC outlet. Before plugging this cord in, be sure the voltage of AC outlet is correct.
To protect your mixer from different kinds of ac problems. if the mixer is "on" and nothing lights, please verify fuse compartment. if fuse is
broken, please read it and change with a new one of same size and values.
TECHNICAL SPECFICATIONS
Inputs :
MIC 1 :
Phono 1-2 :
Line 1-4 :
Output :
Master :
Zone :
PFL zone :
Signal / noise ratio ( à 1 kHz) :
Mic :
Phono :
Line :
Distorsion :
Mic :
Phono :
Line :
Mic equalizer :
Treble :
Bass :
Channel equalizer :
Treble :
Mid :
Bass :
Fréquency response :
Headphone power :
Power supply :
Comsumption :
Dimensions :
Weight :
Electric products must not be put into household waste. Please bring them to a recycling centre.
Ask your local authorities or your dealer about the way to proceed.
© Copyright LOTRONIC 2014
1.5mV/ 600 Ohms, bal/unbal
3.0mV/ 50K Ohms
150.0mV/27K Ohms
0.775V/10K Ohms
0.775V/10K Ohms
0.775V/10K Ohms
>65 dB/ 1.5mV input
>65 dB/ 3.0mV input
>70 dB/ 150mV input
0.5%
0.5%
0.5%
10kHz; +12/-12dB
100kHz; +12/-12dB
10kHz; +10/-30dB
1kHz; +10/-30dB
100kHz; +10/-30dB
20Hz-20kHz +/-3 dB
125Mw @32 Ohms
230VAC, 50Hz
20W
484x175x80mm
4Kg
SYMBOL 250
BSTDJ.COM
Page 11