Clevo m665je Guide Utilisateur Concis page 38

Concise User's Guide
Bluetooth
1. Make sure the module is powered on (Press Fn +
F12), and then insert the Device Drivers & Utilities +
User's Manual CD-ROM into the CD/DVD drive.
2. Click 9.Install Bluetooth Driver > Yes
3. Choose the language you prefer, and click OK.
4. Click Next.
5. Click the button to accept the license agreement, and
then click Next.
6. Click Next > Next > Install.
7. Click Finish > Yes to restart the computer.
8. The IVT Corporation BlueSoleil - Main Window
screen appears on restart.
9. You can configure the settings at any time by going
to the IVT Corporation BlueSoleil - Main Window
control panel (Start > Programs/All Programs >
IVT BlueSoleil), or by clicking the taskbar icon
32 - Driver Installation
PC Camera
1. Make sure the module is powered on (Press Fn +
F10) (click Cancel if you see a " New Hardware
Found " message ) , and then insert the Device Drivers
& Utilities + User's Manual CD-ROM into the CD/
.
DVD drive.
2. Click 10.Install CCD Driver > Yes
3. Choose the language you prefer and click OK.
4. Click Next > Finish to restart the computer.
5. Run the BisonCap application program from the
BisonCam shortcut on the desktop or from the
BisonCam item in the Start > Programs/All
Programs menu (if the hardware is turned off use the
Fn + F10 key combination to turn it on again).
6. You can use the application hot key button
the BisonCap application if you have installed the
hot key driver.
.
7. A Snapshot folder will be placed on the desktop to
record still pictures taken with using the application
hot key button
.
.
to run