Westfalia 316 130 300 107 Instructions De Montage page 15

Installation instructions:
Electrical system for towing hitch
Special information concerning vehicles with parking distance control (PDC)
On vehicles with PDC it is possible to deactivate the PDC for trailer operation.
14. Lay the brown/white cable to the PDC control unit (Fig. 1/2) and connect it.
15. If the control line is not used, insulate and secure the cable end.
Note
If you have any queries concerning the deactivation of the PDC system, please contact the
nearest garage.
16. Only for 13-pin trailer socket:
Using the 3-pin connector (Fig. 1/4) for the constant plus extension kit, the functions
"Constant plus", "Charge lead" and "Ground for charge lead" can be retrofitted. See also
page 12.
Checking correct operation
17. Reconnect the ground of the vehicle's battery.
18. Check the trailer function with the help of a suitable test instrument (with load resistors) or
with the help of a trailer.
19. Secure all cables using cable ties.
20. Refit any parts removed for installation.
Renault Master 316 130 391 101 21/04 15