Climadiff CLIMA17 Notice D'utilisation page 35

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Fan mode:
 In on or timer on state press MODE to select FAN mode. At the moment the corresponding indicator
lamp is on.
 Press SPEED to select appropriate speed, and LOW and HIGH speeds can be circularly selected.
 Temperature is not adjustable.
Caution:
1. When full water indication is displayed, the air conditioner will stop work, you should drain
water in time. After drainage the air conditioner will start automatically.
2. In DRY and FAN modes, you do not need to use exhaust pipe.
3. If your room faces the sun directly, please draw the curtains.
Drainage opération
 When COOL or DRY is run in humid weather, more condensate is produced.
 Water full alarm will be issued as he level in water pan reaches a certain location, compressor stops
operation. Water full indication on display screen will light up and an audible alarm will be issued
simultaneously for 10 times per 5min till the level in water pan is lower than alarm level or water in
water pan has been drained manually. When the alarm is relieved, the air conditioner will resume
normal operation automatically.
 When the air conditioner issues water full alarm, please drain water in time. You can move the air
conditioner to the site where water can be drained directly (such as toilet or sewer), unscrew nut and
pull out water plug to drain all water. Install water plug and nut before use.
Caution:
When water is full, please move the air conditioner steadily, otherwise, water may overflow from
inside.
Water plug
Nut
35

Publicité

Table des Matières
loading

Table des Matières