Product Description And Specifications - Bosch PCM 8 Notice Originale

Symbols and their meanings
provided with the saw blade.
The saw blade diameter must match the in-
formation specified on the symbol.
Product description and
specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended use
The power tool is intended as a stationary machine for mak-
ing straight cuts in wood with and against the grain. It is pos-
sible to cut mitre angles of -48° to +48° and bevel angles of
0° to 45°.
The power tool is designed with sufficient capacity for saw-
ing hardwood and softwood.
This power tool is not suitable for sawing aluminium or other
non-ferrous metals.
Product features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Handle
Laser warning label
(2)
(3) Lever for releasing the tool arm
(4) Protective guard
(5) Retracting blade guard
Fence
(6)
(7) Insert plate
(8) Mounting holes
(9) Locking knob for variable mitre angles
(10) Mitre angle indicator
(11) Scale for mitre angle
(12) Saw table
(13) Recessed handles
(14) Adjustable fence
(15) Clamping handle for variable bevel angles
(16) Laser beam output
(17) Roller
(18) Saw blade
(19) Dust bag
(20) Laser on/off switch (for marking of cutting line)
(21) On/off switch
(22) Chip ejector
(23) Holes for screw clamp
Bosch Power Tools
(24) Hex key
(25) Tilt protector
(26) Transport safety lock
(27) Screw clamp
(28) Spindle lock
(29) Bevel angle indicator
(30) Scale for bevel angle
(31) Fastening screw for insert plate
(32) Fastening screw for tilt protector
(33) Hex socket screw for mounting of saw blade
(34) Clamping flange
(35) Interior clamping flange
(36) Wing bolt
(37) Threaded rod
(38) Clamping lever for the adjustable fence
Technical data
Mitre saw
Article number
Rated power input
No-load speed
Laser type
Laser class
Divergence of laser line
Weight according to EPTA-
Procedure 01:2014
Protection class
Permissible workpiece dimensions (see "Permissible workpiece di-
mensions", page 24)
The specifications apply to a rated voltage [U] of 230 V. These spe-
cifications may vary at different voltages and in country-specific mod-
els.
Dimensions of suitable saw
blades
Saw blade diameter
Base blade thickness
Max. cutting width
Hole diameter
Noise information
Noise emission values determined according to EN
62841-3-9.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 96 dB(A); sound power level
103 dB(A). Uncertainty K = 3 dB.
Wear hearing protection!
English | 21
PCM 8
3 603 M10 0..
W 1200
rpm 5000
nm 650
mW < 1
2
1.0 mrad (full
angle)
kg 7.9
/ II
mm 216
mm 1.4−1.8
mm 2
mm 30
1 609 92A 4DU | (01.08.2018)