Operating Instructions; Manual Watch; Automatic Watch - Ball NM2038 Mode D'emploi

Operating Instructions

[Please see Online User Manual in the Customer Service section at
www.ballwatch.com for the latest information.]

1. Manual Watch

MODELS: NM2038, NM2058, NM3038
Position [1]: Normal / winding position
Position [2]: Time setting
• Winding: A manual watch is wound by turning the crown clockwise
when it is in position [1]. The movement is fully wound when the crown
comes to a stop. Please do not attempt to force the crown beyond this
point. A manual watch should be wound regularly, ideally once a day.
• Time Setting: To set the time, pull out the crown to position [2]. Push the crown
back into position [1] when the correct time is reached.
12

2. Automatic Watch

MODELS: All, except those specifically listed under "Manual Watch"
Functions of the crown
X = Normal position
0 = Manual winding position
1 = Day/Date adjustment
2 = Setting the time
• Manual Winding: If the watch has not been worn for a long period of
time, wind the movement before setting the time. Unscrew the crown to
position [0], then turn the crown clockwise 20 to 30 times.
• Time Setting: To set the time, unscrew the crown and pull out to
position [2]. (see below remark regarding model with non-screwed-in
crown). Push the crown back into position [X] when the correct time is
reached. When setting the time, please ensure that the date display is also
set correctly. It should advance at midnight. If it advances at noon, you will
need to turn the hands forward 12 hours.
13