World Time - Ball NM2038 Mode D'emploi

13. World Time

MODELS: CM2052, DG2022,
DM1028, GM1020, GM2020
See above instructions for
"Automatic Watch" with the
following changes.
In position [2], turning the crown clockwise will advance the local time and
the World Time disc. Turning the crown counterclockwise will reverse only
the local time; the World Time disc remains unchanged.
• Set the time of the second time zone: Turn the crown clockwise until the
correct time is displayed on the dot at the top of the World Time disc. Then,
turn the crown counterclockwise until the correct local time is displayed
for the hour hand.
• On the Engineer Master II Diver Worldtime (DG2022), it is possible to
rotate the City disc to set the city of your choice at 12 o'clock. Use the
crown [P1] at 2 o'clock to set the City disc to match the World Time disc.
The World Time disc moves counterclockwise, so the City disc should be
adjusted to match.
30
• Set the local time: In position [2], turn the crown clockwise to adjust the
minutes hands.
• If the date changes while setting the World Time disc, please do not use
the crown to manually correct the date for at least 12 hours. The pin is
engaged and could be damaged.
• In order to ensure optimal water resistance, the crowns must be fully
screwed down before diving.
• Please take into consideration the use of Daylight Saving Time all around
the world when adjusting your Worldtime function.
31