TFA 60.2517 Mode D'emploi page 15

TFA_No. 60.2517_Anleit_D_GB_F
CUBO -
Radio-controlled alarm clock with thermometer
• In areas where no DCF 77 time reception is possible you can
deactivate the DCF time reception (position OFF). The clock
will then work as a normal quartz clock (default: ON).
• If the DCF reception is on, the manually set time will be
overwritten by the DCF time when the signal is received
successfully.
7.2 Manual setting of alarm clock
• Select your respective alarm function you want with the
ALARM button:
• Set the alarm time in the respective alarm mode.
• Press and hold ALARM button for two seconds.
• The hour digits are flashing.
• Press ▲ or ▼ button to adjust the time you want.
• Confirm with ALARM button.
• Set minutes in the same way.
• Confirm with ALARM button and the alarm is activated
28
06.06.2011 18:02 Uhr
.
Seite 15
CUBO -
Radio-controlled alarm clock with thermometer
• Press ALARM button again and set time for the second
alarm time.
• Press ALARM button again and both alarm times are acti-
vated.
• When the alarm time is reached, the alarm signal will
sound and increase gradually in frequency and volume
and the backlight is flashing.
• The respective alarm symbol
the alarm by pressing any button.
• You can activate the snooze function by pressing the
SNOOZE/LIGHT button on the top.
• Zz and the respective alarm symbol
the alarm will be interrupted for 8 minutes.
• If it is not stopped deliberately, the alarm will automati-
cally turn off after 2 minutes and the snooze function will
be reactivated.
• Press ▲ or ▼ button to activate or deactivate the alarm
function.
is flashing. You can stop
are flashing and
29