Overview Of The Components; Using The Machine - Clatronic DB 3061 K Mode D'emploi & Garantie

• Before fi lling the water tank (8) remove the mains lead. Please do not fi ll the water tank
higher than the MAX mark (approx. 290 ml).
1 Continuously adjustable
temperature regulator
2 Control lamp
3 Steam jet button
4 Steam volume regulator
5 Spray button
6 Filler opening for the water tank
• Clean the ironing base with a slightly damp cloth.
• Fill the water reservoir at the refi ll opening (6), using a fi lling container. Close the lid of
the tank and lock it in place.
• Preferably use distilled water or clear tap water (maximum water hardness level 2). If
water is harder, used distilled water only.
• Do not fi ll battery water, water from the clothes dryer and water containing additives
(such as starch, perfume, softener or other chemicals) into the water reservoir. This
could damage the iron due to residues forming in the steam chamber. These residues
may cause impurities to the fabric when dropping out of the holes in the soleplate.
GB
Note: Only clothes should to be ironed with this machine.
• Before you use the device please remove any protective foil and stickers that may be
present from the ceramic sole plate.
• Completely unwind the line cord.
Ironing without steam (steam jet regulator on „ ")
1. Place the iron on its stand.
2. Turn the steam regulator (4) to „ ".
3. Always set the temperature control to „MIN" before connecting the appliance to a power
point, or before disconnecting it.
44
05-DB 3061 K 44

Overview of the Components

7 Spray nozzle
8 Transparent water container
9 Base
10 Ceramic sole plate
11 Flexible line cord entry
12 Self clean button
First Use of the Machine

Using the Machine

27.04.2006, 15:46:25 Uhr