Equipment Supplied With The Machine; Optional Equipment - Corghi BL 600 Manuel D'utilisation

- Maximum height
- Supply pressure
- Power supply voltage (only BL 600) 115/1/50 - 230/1/50-60
- Motor rating
- Maximum lifting capacity
- Noise level in working conditions

EQUIPMENT SUPPLIED WITH THE MACHINE

Cod. 103956800 Manual front wheel clamp
The clamp is made of two jaws, with a wheel adjustment, that slides along runners on
the racks table.
The fact that it can be positioned along the platform lift is a great advantage when
blocking the wheels in an optimum position.
Cod. 063972700
They are used to lock the motorcycle at the platform lift
Cod. 100019400 Pneumatic front wheel clamp
It is used to clamp more quickly the front wheel on the platform lift.
Cod. 063971600 Descent ramp
(fl oor installation only)
It allows to dismount from the platform lift on the opposite part to the ascent one.
In vertical position it works as wheel stopping, replacing the standard one.
Fix the two support brackets to the upper plane by using the screws equipped with
the lift.
Cod. 063971500 Oil tray
(fl oor installation only)
It allows to have the exhausted oil inside the appropriate containers fl owed in a quick
and clean way.It can be easily fi xed on both sides of the platform lift in every position.
Cod. 063971800 Side support for stand
(fl oor installation only)
When the central stand is missing, it allows to lay the motorcycle on the side stand.
Make the two pins located on its extremity coincide with two of the holes located on
the upper plane of the platform lift.
Cod. 100019500
Additional lift for motorcycle without central stand.
Cod. 063971400 Side extension (3/4 wheel)
(fl oor installation only)
They allows to operate on vehicles having three wheels and on gardening machines.
Loosen the clamps situated in the lower part of the side extensions.
Make the four pins located at their extremities coincide with the holes located on the
upper plane of the platform lift, making sure to deeply insert them.
Fully tighten the clamps to secure the extensions tightly to the lift.
Cod. 063972800 Recess Kit (only BL 600)
Used to recess the lift into the fl oor.
Operator's manual BL 600
(only BL 600)

OPTIONAL EQUIPMENT

Locking band
Motorcycle lifting device
1200 mm
8÷10 bar
230-400/3/50-60
0.75 kW
600 kg
<70dB(A) ± 3dB(A)
(C Fig.16-16a)
(A Fig.16-16A)
(B Fig.16-16a)
(Fig.14)
(Fig.15)
GB
27