Sportplus SP-ET-9600-iE Mode D'emploi page 50

6. ASSEMBLY INSTRUCTIONS
STEP 4
29R
31
29L
11 10
12
1. Fasten the left pedal guide (8) to the belt wheel (66) by sliding it onto the screw on the
wheel support. Fasten with one set of washer (16), D washer (9), washer (10), cap (11), and
hex screw (12). Fasten tightly.
2. Fasten the left lower movable handlebar (26) to the left pedal guide (8). Align both holes
and insert the sleeve (14). Secure with one washer (17), nylon nut (18) and hex screw (15).
Fasten tightly.
3. Attach the plastic covers (29L/29R) to the pedal guide (8). Securing using three self-tapping
screws (31) that are premounted to the pedal guide and the plastic covers.
4. Repeat steps 1 to 3 to mount the right pedal guide (51), the right lower movable
handlebar (49), and the plastic covers (29L/29R).
SP_ET_9600_iE_IM_INT_V05.indb 50
49
26
18
14
15
31
17
16
66
8
9
29R
31
14
29L
17
18
31
15
16
50
10
12
9
11
51
4/29/2021 7:08:53 PM