Sportplus SP-ET-9600-iE Mode D'emploi page 49

6. ASSEMBLY INSTRUCTIONS
STEP 3
1. Fasten the fi xed handlebar (40) to the handlebar tube (32). Fasten with two sets of hex
screws (4) and fl at washers (24).
2. Loosen the four screws (45) on the back of the computer (46).
3. Connect the upper computer cable (41) and the pulse sensor cable (48) to the connections
on the back of the computer (46).
4. Place the computer (46) on the computer support on the handlebar tube. Secure the
computer with the four screws (45) removed earlier.
SP_ET_9600_iE_IM_INT_V05.indb 49
46
45
41
32
49
48
4
40
24
1
4/29/2021 7:08:53 PM