Peaq PPA120BT-B Mode D'emploi page 28

29
4. Firstly, set the audio source's volume to a low level and only
then start the audio playback.
5. Now set the volume using the + and – button on the
speaker's top (+ = up, – = down) (fi g. 5). In addition, you
may increase the volume on the audio source.
6. Turn off the speaker using the PAIR button (fi g. 4). The LED
goes off and an acoustic signal sounds.
LED signals
LED colour
Left side:
Blue
Right side:
• White LED
(PPA120BT-B)
• Red LED
(PPA120BT-W)
Both LEDs
LED status Meaning
Flashes Ready for Bluetooth
connection
Searching for previously
connected Bluetooth device
Lights up Bluetooth connection
steadily established
Flashes Battery is being charged
Lights up Wired connection
steadily established
Flash Low battery
alternately
English