Auxiliary Functions - Beko WMP 10744 XA Manuel D'utilisation

4.3.8 Auxiliary function selection
Select the desired auxiliary functions before starting the programme. Whenever a programme is selected,
frames of the auxiliary function symbol that can be selected together with it illuminates. And when you select
an auxiliary function, the interior area of the auxiliary function symbol also starts to illuminate.
C
Frame of the auxiliary function symbol that cannot be selected with the current programme does not illuminate.
Also the frames of the auxiliary function suitable for the current programme after the washing has started
remains illuminated. You can select or cancel the auxiliary functions whose frames are illuminated. If the wash
cycle has reached a point where you cannot select the auxiliary function, the function's frame turns off.
C
Some functions cannot be selected together. If a second auxiliary function conflicting with the first one is selected before
starting the machine, the function selected first will be canceled and the second auxiliary function selection will remain
active. For example, if you want to select Quick Wash after you have selected the Additional Water, Additional Water will be
canceled and Quick Wash will remain active.
An auxiliary function that is not compatible with the programme cannot be selected. (See, "Programme and consumption
table")
Some programmes have auxiliary functions that must be operated simultaneously. Those functions cannot be cancelled. The
frame of the auxiliary function will not be illuminated, only inner area will be illuminated.

4.3.8.1 Auxiliary functions

• Prewash
A Prewash is only worthwhile for heavily soiled laundry. Not using the Prewash will save energy, water,
detergent and time.
• Fast+
When this function is selected, the durations of the relevant programmes get shorter by 50%.
Thanks to the optimised washing steps, high mechanic activity and optimum water consumption,
high washing performance is achieved in spite of the reduced duration.
• Pet Hair Removal
This function helps to remove pet hair that remain on your garments more effectively.
When you select this function, Prewash and Extra Rinse steps are added to the normal programme. Thus,
washing is performed with more water and the pet hair is removed more effectively.
• Clean & Wear
When selected, it uses hot air at the end of the programme to make the garments ready to wear.
C
When this function is selected, the maximum load is 1 kg.
When this function is pressed once, the function selection will be active. When pressed for the second or third time, the
time will decrease. If the load is less than 1 kg, the time can be decreased.
22 / EN
88
C
0
88:88
1888
Washing Machine / User's Manual