Beko WMP 10744 XA Manuel D'utilisation page 21

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

4.3.7 Spin speed selection
Whenever a new programme is selected, the recommended spin speed of the selected programme is
displayed on the Spin Speed indicator.
C
It is possible that the recommended spin speed value is not the maximum spin speed that can be selected for the current
programme.
Press the Spin Speed Adjustment button to change the spin speed. Spin speed decreases gradually.
Then, depending on the model of the product, "Rinse Hold" and "No Spin" options appear on the display.
C
Spin Speed Adjustment button only serves for decreasing the spin speed.
Rinse Hold option is indicated with "ı_ı" symbol and No Spin option is indicated with "_" symbol.
If you are not going to unload your laundry immediately after the programme completes, you can use Rinse
Hold function in order to prevent them from getting wrinkled when there is no water in the machine.
This function holds the laundry in the final rinsing water.
If you want to spin your laundry after the Rinse Hold function:
- Adjust the Spin Speed.
- Press Start / Pause / Cancel button. The programme will resume. Machine drains the water and spins the
laundry.
If you want to drain the water at the end of the programme without spinning, use No Spin function.
C
No change can be made in programmes where spin speed adjustment is not allowed.
You can change the spin speed after the washing starts if the washing steps allow it. Changes cannot be
made if the steps do not allow it.
Rinse hold
If you are not going to unload your clothes immediately after the programme completes, you can use rinse
hold function to keep your laundry in the final rinsing water in order to prevent them from getting wrinkled
when there is no water in the machine. Press Start / Pause button after this process if you want to drain the
water without spinning your laundry. Programme will resume and complete after draining the water.
If you want to spin the laundry held in water, adjust the Spin Speed and press Start / Pause button.
The programme will resume. Water is drained, laundry is spun and the programme is completed.
Washing Machine / User's Manual
88
0
C
88:88
1888
88
0
C
88:88
88
0
C
88:88
21 / EN

Publicité

Chapitres

Table des Matières
loading

Table des Matières