5 Operation
1. Wash your hands
with soap and warm
water.
Rinse and dry
thoroughly.
2. Open the lancing
device by twisting
the cap in a
clockwise direction
and then remove it.
3. Insert the lancet all
the way into the cup
without twisting it in
the lancing device.
4. Twist off the protective
end of the lancet
carefully. Retain the
protective end until
you dispose of the
lancet.
5. Replace the cap on
the lancing device and
tighten by turning it
in an anti-clockwise
direction (not too
tight).
29
GB