Abus TVIP81000 Mode D'emploi page 35

Version 05/2013
Masquer les pouces Voir aussi pour TVIP81000:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 38
English
3. Pull the connecting cable through the middle hole in the mast mount.
4. Secure the stainless steel clamps by tightening the screws.
5. Attach the seal between the mast mount and the wall mount.
6. Screw the wall mount into place using the four threaded screws and spring washer to help you.
7. Continue with installation of the Speed Dome.
Further information on installing the Speed Dome can be found in section 4.
35

Publicité

Table des Matières
loading

Table des Matières