Abus TVIP81000 Mode D'emploi page 27

6. Installing the dome
6.1 Undo both screws on the side of the ceiling mount and place the safety mounts in position as
shown.
Safety mount
6.2 Place the Speed Dome in the hole drilled in the ceiling.
6.3 Tighten both screws in the safety mounts. The safety mounts automatically move outwards to
affix the Speed Dome in the ceiling.
7. Installing the cover panel
7.1 Fasten the cover panel to the dome and align the triangular groove with the arrow in the ceiling
mount.
7.2 Once the cover panel has been attached to the ceiling, turn the cover panel in the direction of the
arrow to secure it accordingly.
To complete installation, remove the protective film from the dome.
Safety mount
Ceiling
Arrow
Groove
27
English
Safety mount
Safety mount