Bringing Into Use; Maintenance And Cleaning - OWIM ‎Livarno Lux HG00164A Instructions D'utilisation Et Consignes De Sécurité

T he bulb becomes hot during oper-
ation. Allow the lamp and bulb to
cool before you touch them.
T he LEDs cannot be replaced.
T he product is only suited for use
with the included mains adapter
(Model No. WELD-03018BCCDC4).
P lease note that the power adapter
continues to draw a small amount
of power even if the lamp is turned
off as long as the power adapter is
plugged into a power outlet. To switch
the device off completely, unplug
the power adapter from the socket.
The illuminant is not replaceable.
If the illuminant fails at the end of its
life, the entire light must be replaced.

Bringing into use

Q
N ever direct the LED light beam on to
reflective surfaces or at people or an-
imals. Failure to observe this advice
may result in eye injury and / or loss
of sight to people or animals. Even
a weak LED light beam can cause
eye damage.
A ttach the lamp in the desired posi-
tion by means of the clamp
A large force is required to attach
the lamp. This could result in a risk
of shearing or crushing injury through
trapping parts of your body.
C onnect the mains connector
the mains adapter
I nsert the mains adapter
ordinary domestic mains outlet sock-
et (220–240 V ~ (alternating current)).
U se the ON / OFF switch
switch the lamp on or off.
B end the flexible lamp arm
the lamp into the desired position.
Note: Do not turn the flexible lamp
arm
the mains lead inside the lamp could
be damaged.
Maintenance
Q
and Cleaning
Note: The device requires no mainte-
nance. The LEDs cannot be replaced.
D o not use any solvents, petrol or
. similar. This would cause damage
2
to the light.
CAUTION! RISK OF
SHEARING OR
CRUSHING INJURY!
.
6
completely about itself or
1
to
5
into an
6
to
3
to bring
1
GB/IE 15