Service And Technical Problems - Magnat SBW 250 Mode D'emploi

Table des Matières

Les langues disponibles

Operating elements of the Soundbar

(4) ON/STBY: Switches the device on when it is in the standby mode. Conversely the device can be switched from power operation to

the standby mode.

(5) VOLUME: Increases (+) or decreases (-) the volume.

(6) SOURCE: Selects the input.

Operating elements of the Subwoofer

(15) LED-status indication: This LED illuminates red when the device is in standby mode. The LED lights up green when the subwoofer

is in operating mode. See the „Initial start-up" section..

Operating elements of the Subwoofer

(17) CONNECT: Starts the manual pairing mode on the subwoofer. See the „Initial start-up" section.

Operation with the system remote control (fig. 7):

(18) ON/STBY: Switches the device on when it is in the standby mode. Conversely the device can be switched from power operation to

the standby mode.

(19) HDMI/ARC: Selects the audio input HDMI/ARC:

(20) HDMI 1/2/3: Selects the additional audio / video inputs HDMI 1, 2, 3

(21) BT: Selects the audio input BLUETOOTH:

(22) BT PAIR: Switches the device to the pairing mode when in Bluetooth operation to establish a connection to a Bluetooth source

device.

(23) DIGITAL: Selects the audio input DIGITAL IN:

(24) AUX: Selects the audio input AUX IN:

(25) MUTE: Switches the sound on and off.

(26) VOLUME: Increases (+) or decreases (-) the volume.

(27) NIGHT: Activates or deactivates a playback mode with reduced dynamics and a frequency response that is adapted for sound-

sensitive situations (e.g. late at night).

(28) SURR: Switches the 3D surround sound function on or off.

(29) SOUND: Selects various sound settings:

LINEAR: Linear sound setting

MUSIC: Optimises the frequency response of the unit for music playback.

MOVIE: Optimises the frequency response of the unit for film sound reproduction.

VOCAL: Emphasises the vocal range for particularly good speech intelligibility.

(30) MENU: Opens the settings of the Soundbar

The following settings can be selected and changed with the VOL +/- buttons. (26). Pressing the menu button again will set these

changes:

SUB: Increases (+) / decreases (-) the volume of the subwoofer.

EQ: Sound adjustment for different positioning of the soundbar

WALL: This setting optimises the sound when the soundbar is fitted to the wall.

DESK: This setting optimises the sound when the soundbar is positioned on a shelf in front of or under the TV.

ASTBY: This device switches off automatically after approx. 20 minutes to save energy. This function can be manually disabled. The

factory setting is enabled.

RESET: Sets all settings back to default settings.

EXIT: Exits the setting menu.