Auto Standby Function; Service And Technical Problems - Magnat SBW 200 Mode D'emploi

OPERATION
Operating elements of the Soundbar (rear) (Fig. 2)
(1) POWER SWITCH: After installation use this switch to turn on the device. If the device is not going to be used for a prolonged period, it
should be switched off.
Operating elements of the Soundbar (front) (Fig. 2)
(6) POWER (Standby indicator): When the Soundbar is on standby, the standby indicator is red.
(7) Sensor for remote control: Please aim at this sensor when using the remote control.
(8) Source indicators:
ANALOG INPUT: The indicator illuminates green.
OPTICAL INPUT: The indicator illuminates white.
BLUETOOTH INPUT: The indicator illuminates blue. The indicator flashes when Bluetooth pairing is activated and pairing failed.
Operating elements of the Soundbar (side) (Fig. 2)
(9) ON/STBY: Switches the device on when it is in the standby mode. Conversely the device can be switched from power operation to the
standby mode.
(10) BLUETOOTH: Switches the device to the pairing mode when in Bluetooth operation to establish a connection to a Bluetooth source
device. The blue LED status indicator (fig. 2, pos. 8) flashes quickly.
(11) SOURCE: Selects the input.
(12) VOLUME: Increases (+) or decreases (-) the volume.
Operating elements of the Subwoofer (rear) (Fig. 3)
(13) LED-status indication: The LED lights up blue when the subwoofer is in operating mode. See the „Initial start-up" section.
(14) PAIR: Starts the manual pairing mode on the subwoofer. See the „Initial start-up" section.
Operation with the system remote control (fig. 4):
(17) ON/STBY: Switches the device on when it is in the standby mode. Conversely the device can be switched from power operation to the
standby mode.
(18) DIGITAL: Selects the audio input OPTICAL:
(19) ANALOG: Selects the audio input ANALOG IN:
(20) BT: Selects the audio input BLUETOOTH:
(21) MUSIC: Optimises the frequency response of the unit for music playback.
(22) MOVIE: Optimises the frequency response of the unit for film sound reproduction.
(23) VOCAL: Emphasises the vocal range for particularly good speech intelligibility.
(24) LINEAR: Linear sound setting
(25) BASS: Increases (+) / decreases (-) the volume of the subwoofer.
(26) MUTE: Switches the sound on and off.
(27) VOLUME: Increases (+) or decreases (-) the volume.

AUTO STANDBY FUNCTION

The unit has an Auto Standby function that automatically switches the device to stand-by mode if no audio signal is detected on the
inputs or if there is no Bluetooth pairing over a period of approx. 15 minutes. This function implements an EU energy-saving regulation
(1275/2008 EC), reducing power consumption if the device is accidentally left turned on after use.
MAINTENANCE
The surface is best cleaned with a mild household cleaner. On no account use furniture polish or similar products.

SERVICE AND TECHNICAL PROBLEMS

If you should encounter any technical problems, please contact your specialist dealer or Magnat Audio-Produkte GmbH, Tel.: 02234807-0.
14