Safety Considerations - TLV V1-RL Manuel D'utilisation

1. Safety Considerations

• Read this section carefully before use and be sure to follow the instructions.
• Installation, inspection, maintenance, repairs, disassembly, adjustment and valve
opening/closing should be carried out only by trained maintenance personnel.
• The precautions listed in this manual are designed to ensure safety and prevent equipment
damage and personal injury. For situations that may occur as a result of erroneous handling,
three different types of cautionary items are used to indicate the degree of urgency and the
scale of potential damage and danger: DANGER, WARNING and CAUTION.
• The three types of cautionary items above are very important for safety; be sure to observe
all of them, as they relate to installation, use, maintenance, and repair. Furthermore, TLV
accepts no responsibility for any accidents or damage occurring as a result of failure to
observe these precautions.
DANGER
Indicates an urgent situation
that poses a threat of death or
serious injury.
CAUTION
Indicates that there is a
potential threat of death or
serious injury.
Install properly and DO NOT use this product outside the recommended
operating pressure, temperature and other specification ranges.
Improper use may result in such hazards as damage to the product or
malfunctions, which may lead to serious accidents. Local regulations may
restrict the use of this product to below the conditions quoted.
Take measures to prevent people from coming into direct contact
with product outlets. Failure to do so may result in burns or other injury
from the discharge of fluids.
When disassembling or removing the product, wait until the internal
pressure equals atmospheric pressure and the surface of the
product has cooled to room temperature. Disassembling or removing
the product when it is hot or under pressure may lead to discharge of
fluids, causing burns, other injuries or damage.
Be sure to use only the recommended components when repairing
the product, and NEVER attempt to modify the product in any way.
Failure to observe these precautions may result in damage to the
product or burns or other injury due to malfunction or the discharge of
fluids.
Use only under conditions in which no freeze-up will occur. Freezing
may damage the product, leading to fluid discharge, which may cause
burns or other injury.
Use under conditions in which no water hammer will occur. The
impact of water hammer may damage the product, leading to fluid
discharge, which may cause burns or other injury.
Do not stand on or apply body weight to the handwheel. The
handwheel may break, resulting in injury or other accidents.
Do not carry the product by its handwheel. The handwheel may turn
causing the balance to shift and the product to be dropped, resulting in
injury.
Always wear eye protection and heat-resistant gloves when
operating the blow-off valve. Failure to do so may result in burns or
other injury.
When operating the blow-off valve, stand to the side well clear of
the outlet to avoid contact with internal fluids that will be
discharged. Failure to do so may result in burns or other injury.
Do not use excessive force when opening the blow-off valve. Such
force may break the pin equipped as a valve stopper, causing a blowout
from internal pressure resulting in burns or other injury.
― 2 ―
WARNING
Indicates that there is a
possibility of injury, or
equipment/product damage.
CAUTION