Volume Control - Yamaha C-5000 Mode D'emploi

L. INPUT selector/indicator
Enables you to select the input source to play back.
Options are: PHONO, PHONO BAL, TUNER, CD, BAL 1,
BAL 2, LINE 1, and LINE 2. The indicator for the selected
input source lights up.
Note
If LINE 2 is selected here, audio signals will not be output at
the LINE 2 OUT (recording) jacks .
M. SUBSONIC FILTER switch
Toggles between ON (enabled) and THROUGH (disabled)
for the subsonic filter. For more information, refer to
"Adjusting the turntable input setting" (page 29).
Note
If the INPUT selector is set to any option other than PHONO
or PHONO BAL, the filter will be disabled .
µ
¹
¸
N. AUDIO MUTE switch/indicator
Press this switch to reduce the current volume level by
approximately 20 dB. The indicator will light up. Press
again to restore the audio output to the previous volume
level. The indicator will turn off.
O.

VOLUME control

Adjusts the volume level. This setting will not affect the
output level at the LINE 2 OUT (recording) jacks.
Note
The VOLUME control will not affect the volume level if EXT .
DIRECT is selected as the input source . To adjust the volume
level, use the volume control on the external preamplifier
or another component connected to the EXT . IN jacks .
P. Feet
If the unit is unstable, adjust the height of the feet as
needed by rotating them.
9