Trigger Connections; Controlling The Power On-And-Off Operation Of A Connected Component, Such As A Power Amplifier, In Sync With This Unit; Controlling The Unit's Power On-And- Off Operation In Sync With A Connected Component, Such As An Av Receiver - Yamaha C-5000 Mode D'emploi

Controlling the power on-and-
off operation of a connected
component, such as a power
amplifier, in sync with this unit
You can control the power on-and-off operation of a
connected component, such as a Yamaha CD player or
power amplifier, in sync with this unit.
Use a system cable to connect the unit's TRIGGER OUT
jack to the connected component's TRIGGER IN jack.
24

Trigger connections

TRIGGER
CD player
IN jack
Power amplifier
TRIGGER IN jack
Controlling the unit's power on-
and-off operation in sync with a
connected component, such as
an AV receiver
You can control the unit's power on-and-off operation
in sync with a connected component, such as a Yamaha
AV receiver. Use an optional system cable to connect the
unit's TRIGGER IN jack to the connected component's
TRIGGER OUT jack. While the unit is in standby mode,
turning on the power to the connected component will
also turn on the unit, and the signal at the EXT. IN jacks
will be selected as the input source. When the power to
the connected component is turned off, the unit will enter
standby mode.
AV receiver
TRIGGER
OUT jack
Note
• If the power switch of this unit is turned OFF, power
to the unit will not be triggered from a connected
component .
• Unless the input source is selected via the EXT . DIRECT
switch, turning off the connected component will not
turn off power to the unit .