Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

sETTINgs

Once the power cable is connected to the rear of the stove, the system remains inactive and a first screen appears on the panel with the
word OFF..
MAINs POWER FREQUENCY 50/ 60HZ
If the stove is installed in a country with a frequency of 60Hz, the display will show
described below.
CONTROls PROCEDURE:
• Press key 4,
• select the required frequency using keys 1 or 2.
• Press key 4 to confirm and key 3 to scroll back through the menus until the initial page.
LANGUAGE
This menu allows the preferred language to be selected.
The available languages are: Italian - English - german - French - spanish - Portuguese.
CONTROls PROCEDURE:
• Press key 4.
• Press key 1 or 2 until
• select the language using keys 1 or 2.
• Press key 4 to confirm and key 3 to scroll back through the menus until the initial page.
DISPLAY
This menu allows you to adjust the brightness of the display. The values range from OFF, 1 to 20. If set to OFF, the display backlighting is set
to maximum brightness and turns off after a 60 second delay.
The backlighting can be turned on again by pressing any key or if the stove is in alarm status.
CONTROls PROCEDURE:
• Press key 4.
• Press key 1 or 2 until
• Use keys 1 or 2 to set the desired intensity.
• Press key 4 to confirm and key 1 to scroll back through the menus until the initial page.
DELTA T
This function allows the setting of the sensitivity on the variation of temperature for the adjustment of the fan speed.
The possible values for delta t go from: 0,5 °C - 5 °C.
CONTROls PROCEDURE:
• Press key 4.
• Press key 1 or 2 until
• Use keys 1 or 2 to set the desired value..
• Press key 4 to confirm and key 3 to scroll back through the menus until the initial page.
DEGREES
This menu allows you to set the unit of measure for the temperature..
The predefined value is °C.
CONTROls PROCEDURE:
• Press key 4.
• Press key 1 or 2 until
• Use keys 1 or 2 to select Celsius or Fahrenheit.
• Press key 4 to confirm and key 3 to scroll back through the menus until the initial page.
34
LANGUAGE
appears and confirm by pressing key 4.
DISPLAY
appears and confirm by pressing key 4.
DELTA T
appears and confirm by pressing key 4.
DEGREES
appears and confirm by pressing key 4.
"POWER FREQ.
ENgLIsH
ERROR". Change the frequency as

Publicité

Table des Matières
loading

Table des Matières