Peg-Perego kit pramette tak Notice D'emploi page 6

EN_English
Thank you for choosing a Peg-Pérego product.
WARNING
_ IMPORTANT: read the
instructions carefully before use
and keep for future reference.
Your child's safety could be at
risk if you do not follow these
instructions.
_ Assembly and preparation of the
product must be carried out only by
adults.
_ WARNING: this product is only
suitable for a child who cannot
sit up unaided.
_ WARNING: this product is
suitable for children who cannot
sit unaided, cannot roll and are
unable to raise themselves on
their hands and knees. Maximum
weight of child: 9Kg.
_ Do not use this product if there are
parts missing or signs of breakage.
_ Before use, make sure that all
the attachment mechanisms are
correctly connected.
_ Do not use accessories which are
not approved by the manufacturer.
_ WARNING: When lying, ensure that
the baby's head is not below the
body.
_ WARNING Do not add any
mattress are not approved by the
manufacturer.
COMBINED WITH CHASSIS:
_ This product is compatible with
the following original Peg-Perego
products: Tak.
_ WARNING: never leave the child
unattended.
The images referring to the textile details may
differ from the collection purchased.
For more information, consult our website:
www.pegperego.com
INSTRUCTIONS
Before securing Pramette Tak to the Tak stroller:
- remove the stroller's hood,
- fully lower the stroller's backrest,
- fully extend the stroller's front bar.
1 You can now secure Pramette Tak to the Tak stroller
(mum-facing only).
2 Fasten the front buttons, also on the front bar (Fig a).
Then fasten the side button on the two sides (Fig.b).
3 Fasten the two adjuster straps to the stroller's backrest.
Now lower the stroller's backrest.
4 Fasten the stroller's hood to the lower openings.
5 Open the hood fully to make it easier to unfasten the
hood's inner button (Fig a).
Fasten the Pramette Tak side button to the stroller, as
shown in the figure (fig b).
6 Fasten the buttons of the Tak hood.
7 Finally, pucker the hood by pulling the drawstring
upwards (Fig a).
Put on the hood, including Pramette Tak (Fig b).
8 Pramette Tak secured correctly.
PEG-PÉREGO S.p.A.
Peg Perego SpA adopts a quality management system
certified by TÜV Italia Srl in accordance with the ISO
9001 standard. Peg Pérego can make changes at any
time to the models described in this publication for
technical or commercial reasons.
PEG-PÉREGO AFTER-SALES SERVICE
If any parts of the item get lost or damaged, only
use genuine Peg Pérego spare parts. For any repairs,
replacements, information on the products and sales
of genuine spare parts and accessories, contact the
Peg Pérego Assistance Service and state the serial
number of the product.
tel. 0039/039/60.88.213
fax 0039/039/33.09.992
e-mail assistenza@pegperego.com
website www.pegperego.com
All intellectual property rights on the contents of this
manual are property of PEG PEREGO S.p.A. and are
protected by the laws in force.
- 6 -