EN
After Treatment
1. After treatment, apply cream to the feet so that the skin
becomes soft and tender.
2. Clean the device after each use (see "Cleaning and Stor-
age") and let it dry if necessary.
Cleaning and Storage
CAUTION!
■
Make sure that the device is switched off before cleaning it!
■
Do not immerse the device and rollers in water or other
liquids. Do not rinse them under running water!
■
Do not use any corrosive or abrasive cleaning agents to
clean the device. These can damage the surface.
1. For hygiene reasons, the device should be cleaned after
every use.
2. Brush off the roller and the outlet for fl aky calluses (follow-
ing dry use) or rinse under running water.
3. Dry carefully after rinsing or allow it to dry in the air.
24
3. Place the callus areas against the ro-
tating roller without exerting pressure
and allow them to be ground down.
If the device is pressed too fi rm-
ly against the skin, the roller will
automatically come to a stop to
prevent skin injuries.
4. Switch off the device after use. To do
this, press the On/Off switch again.