TDK-Lambda NV300 Manuel D'utilisation page 14

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 5
NV300 Handbook
Overvoltage Category
Class
Weight
IP Rating
Level of Insulation:
Dielectric Strength testing is carried out as follows:
Primary mains circuit to earth - 2.25 - 2.35KVDC.
*Primary mains circuits to secondary: 4.25-4.35kVDC.
Outputs to earth are isolated to 200VDC.
*Important Note: This test is not possible with Y capacitors fitted to the unit as damage to these capacitors may occur.
It is also necessary to short circuit the outputs together and to earth.
Safety Approvals:
UL60950-1 and CSA22.2 No.60950-1 - UL Recognised. C-UL for Canada.
UL/CSA 60601-1 - UL + C -UL approval
IEC / EN60950-1 - CE mark.
CE marking when applied to any NV300 product indicates compliance with the Low Voltage Directive
in that it complies with EN60950-1 and with the ROHS Directive.
Fusing: Internal fuse (FS1): F6.3AH, 250V, 5x20mm
Symbols:
AC
DC
Danger, shock hazard
Note: All output voltages/variants may not be available as standard units, refer to datasheet for standard
product range. These (and other variants) may be available as non-standard or custom units, please contact
our sales team for details.
PRODUCTS COVERED
Unit Configuration Code:
NVx-abcde-f-g-ijk
where:
x =
a =
b =
c =
d =
e =
bbbbb
f =
fffff
g =
bbbbbnnnnn
ijk =
sssssss
EARTH
Caution refer to supplementary information
A3 for NV300
Number of Outputs: 1, 2, 3 or 4
Channel 1 Output Voltage†: 5, T or G
Channel 2 Output Voltage†: 1, 2, 2H, 3, 3H, 5, 5H, T, F or 0
Channel 3 Output Voltage†: T, F, TH, FH, G or 0
Channel 4 Output Voltage†: 3H, 5H, T, F, TH, FH, 0H (fan only channel 4 output) followed
by P for positive output or 0
Global Option : N3 for 5V version with ATX compatibility, N4 for 12V version with ATX, N5
for 13.5V version ATX compatibility or nothing for no Global Option present
U for U chassis, C for U chassis and cover, F for U chassis and cover with fan, I for U
chassis and cover with fan and IEC inlet or nothing for Open Frame
Three numbers from 0 to 9 which denotes various output voltages and currents within the
specified ranges of each output for a particular unit or blank for standard output settings
II
I
1 Kg max
IPX0
N – Neutral
Page 14 of 25
L – Live
17173 issue 14, October 2018

Publicité

Table des Matières
loading

Table des Matières