Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Liens rapides
CUS400M Handbook
ENGLISH
General Safety Instructions:
READ SAFETY INSTRUCTIONS
Servicing:
These products are not customer serviceable. TDK-Lambda UK LTD. and their authorised agents only are
permitted to carry out repairs.
Critical Components:
These products are not authorised for use as critical components in nuclear control systems, life support
systems or equipment for use in hazardous environments without the express written approval of the
Managing Director of TDK-Lambda EMEA.
Product Usage:
These products are designed for use within host equipment which restricts access to authorised competent
personnel.
This product is a component power supply and is only to be installed by qualified persons within other
equipment and must not be operated as a stand-alone product.
This product is for sale to business to business customers and can be obtained via distribution channels.
It is not intended for sale to end users.
This product is a component power supply and does not fall within the scope of the EMC directive. Compliance
with the EMC directive must be considered in the final installation. Please contact your local TDK-Lambda
office
Environmental:
These products are IPX0 and therefore chemicals/solvents, cleaning agents and other liquids must not be
used.
Environment:
This power supply is a switch mode power supply for use in applications within a Pollution Degree 2,
overvoltage category II environment. Material Group IIIb PCB's are used within it.
.
Output Loading:
The output power taken from the power supply must not exceed the rating stated on the power supply label,
except as stated in the product limitations in this handbook.
Input Parameters:
This product must be operated within the input parameters stated in the product limitations in this handbook.
End of Life Disposal:
The unit contains components that require special disposal. Make sure that the unit is properly disposed of at
the end of its service life and in accordance with local regulations.
260519-02 Apr 2020
Page 1 of 22
Publicité
Table des Matières
Manuels Connexes pour TDK-Lambda CUS400M
Sommaire des Matières pour TDK-Lambda CUS400M
- Page 1 It is not intended for sale to end users. This product is a component power supply and does not fall within the scope of the EMC directive. Compliance with the EMC directive must be considered in the final installation. Please contact your local TDK-Lambda office...
-
Page 2: Risk Of Electric Shock
Internal fuses protect the unit and must not be replaced by the user. In case of internal defect, the unit must be returned to TDK-Lambda UK LTD or one of their authorised agents. A suitable mechanical, electrical and fire enclosure must be provided by the end use equipment for mechanical, electric shock and fire hazard protection. -
Page 3: Gefahr Durch Elektrischen Schlag
Allgemeine Sicherheitsvorschriften: LESEN SIE DIE SICHERHEITSVORSCHRIFTEN Wartung: Diese Produkte können nicht durch den Kunden gewartet werden. Nur TDK-Lambda UK LTD. und deren zugelassene Vertriebshändler sind zur Durchführung von Reparaturen berechtigt. Kritische Komponenten: Diese Produkte sind nicht für die Verwendung als kritische Komponenten in nuklearen Kontrollsystemen, Lebenserhaltungssystemen oder Geräten in gefährlichen Umgebungen geeignet, sofern dies nicht... - Page 4 Der Haupteingangsanschluss ist nicht für die Verwendung als Feldverdrahtungsanschluss geeignet. Eine interne Sicherung schützt das Gerät und darf durch den Benutzer nicht ausgetauscht werden. Im Fall von internen Defekten muss das Gerät an TDK-Lambda UK LTD oder einen der autorisierten Vertriebshändler zurückgeschickt werden.
-
Page 5: Lire Les Consignes De Securite
FRANÇAIS LIRE LES CONSIGNES DE SECURITE Entretien: Ces produits ne peuvent pas être réparés par l’utilisateur. Seuls, TDK-Lambda UK LTD et ses agents agréés sont autorisés à effectuer des réparations. Composants critiques: Ces produits ne doivent pas être utilisés en tant que composants critiques dans des systèmes de commande nucléaire, dans des systèmes de sauvetage ou dans des équipements utilisés dans des environnements... - Page 6 Un fusible interne protège le module et ne doit pas être remplacé par l'utilisateur. En cas de défaut interne, le module doit être renvoyé à TDK-Lambda UK LTD ou l'un de ses agents agréés. Une enceinte appropriée doit être prévue par l'utilisateur final pour assurer la protection contre les chocs mécaniques, les chocs électriques et l'incendie.
- Page 7 Questo alimentatore è da considerarsi come un componente e come tale non è assogettato dagli scopi della direttiva EMC. Conformità alla direttiva EMC deve essere considerata nell'installazione finale di utilizzo. Gli uffici di TDK-Lambda Sas Succursale Italiana sono a vostra disposizione per ulteriori ragguagli.
- Page 8 Un fusibile interno protegge l'unità e non deve essere sostituito dall'utente. Nell'eventualità di un difetto interno, restituire l'unità a TDK-Lambda UK LTD o a uno dei suoi agenti autorizzati. L'apparecchiatura finale deve includere una recinzione meccanica, elettrica e antincendio per proteggere dai pericoli di natura meccanica, dalle scosse elettriche e dai pericoli di incendio.
- Page 9 Instrucciones generales de seguridad: LEA LAS INSTRUCCIONES DE SEGURIDAD Servicio: Estos productos no pueden ser reparados por los clientes. TDK-Lambda UK LTD. y sus agentes autorizados son los únicos que pueden llevar a cabo las reparaciones. Componentes fundamentales: Estos productos no pueden ser utilizados como componentes fundamentales en sistemas de control nuclear, sistemas de soporte vital o equipos a utilizar en entornos peligrosos sin el consentimiento expreso por escrito del Director General de TDK-Lambda EMEA.
- Page 10 El conector de entrada de la red no es apto para ser utilizado a modo de bornes de cableado de campo. Un fusible interno protege la unidad y este no debe ser nunca reemplazado por el usuario. En caso de existir algún defecto interno, la unidad debe ser enviada a TDK-Lambda UK LTD o a uno de sus agentes autorizados.
-
Page 11: Risco De Choque Eléctrico
Instruções gerais de segurança: LEIA AS INSTRUÇÕES DE SEGURANÇA Manutenção: Estes produtos não são podem ser submetidos a manutenção por parte do cliente. Apenas a TDK-Lambda UK LTD e os seus agentes autorizados têm permissão para realizar reparações. Componentes essenciais: Não é... - Page 12 Existe um fusível interno que protege a unidade e que não deve ser substituído pelo utilizador. Em caso de defeito interno, a unidade deve ser devolvida à TDK-Lambda UK LTD ou a um dos seus agentes autorizados. O equipamento de utilização final deve fornecer um bastidor com protecção mecânica, eléctrica e contra incêndios adequada.
-
Page 13: Environmental Specifications
Where any part of this product is made accessible to the operator in the end use equipment, the operator must not touch this part and the patient at the same time. The chassis/cover/customer fixing points when fitted to the CUS400M in a Class II configuration has (Basic/Supplementary) insulation to Primary and (Basic/Supplementary) insulation to Secondary. - Page 14 UL/CSA 60601-1/ANSI/AAMI ES 60601-1 - UL + C -UL approval Fusing: Internal Dual fuses (F1 and F2) in the live and Neutral line, T8AH, 250V. (Standard CUS400M) Internal Single fuse (F1) in the live line, T8AH, 250V. (Option /E) Symbols:...
- Page 15 Example: CUS400M-24/FE-0001A For non-standard units: Prefix with “K". Follow by basic model type eg. CUS400M. Followed by "-NNNNL", where N is a string of numbers which identifies the non-standard requirement. L is a letter, starting with "A", which is incremented for any customer revision.
-
Page 16: Model Designation
CUS400M Handbook Output Parameters There are two CUS400M standard models as shown in the tables below. All of these models may be either fan, forced air, conduction or convection cooled. The output parameters are shown in the tables below. Output... - Page 17 CUS400M Handbook Variations and limitations of use: 1. Component temperatures, for customer air or convection cooled models, must be monitored in the end use application as described in the “ Cooling for Unit Temperature Table” below . Cooling for unit The following method must be used for determining the safe operation of PSUs.
- Page 18 CUS400M Handbook LAYOUT FOR CUS400M UNITS Base board topside Connections CONNECTOR MANUFACTURER HOUSING CRIMP PIN VAR-2 SVA-41T-P1.1 TE CONNECTIVITY 2-520407-2 J3 & J4 MOLEX TAG 19073-0165 MOLEX 51110-1051 50394 MOLEX 51191-0200 50802 260519-02 Apr 2020 Page 18 of 22...
- Page 19 CUS400M Handbook Outline drawings for CUS400M Open Frame Unit 260519-02 Apr 2020 Page 19 of 22...
- Page 20 CUS400M Handbook U Chassis Option 260519-02 Apr 2020 Page 20 of 22...
- Page 21 CUS400M Handbook U Chassis with Cover Option 260519-02 Apr 2020 Page 21 of 22...
- Page 22 CUS400M Handbook With Metal Baseplate TDK-Lambda UK Ltd Kingsley Avenue, Ilfracombe Devon, EX34 8ES Telephone - Sales and Service +44 (0)1271 856666 Head Office and Works +44 (0)1271 856600 Facsimile +44 (0)1271 864894 WEBSITE: www.uk.tdk-lambda.com 260519-02 Apr 2020 Page 22 of 22...