Getting To Know Your Appliance; The Control Panel; The Hotplates; Residual Heat Indicator - CONSTRUCTA CA328352 Manuel D'utilisation

Select a suitable ongoing cooking setting. You will waste
■
energy by using an ongoing cooking setting which is too
high.

Getting to know your appliance

The instruction manual is the same for various different hobs.
An overview of the models with their dimensions is given on
page 2.

The control panel

Displays
Heat settings
‚-Š
Residual heat
•/œ
Electronic boil start control
'
Controls
Main switch
#
Control panel pause
"
Childproof lock
"
Electronic boil start control
'

The hotplates

Hotplate
Single-circuit hotplate
$
Dual-circuit hotplate
ð
Extended cooking zone
ç
When the hotplate is activated: the corresponding indicator lights up.
When the hotplate is switched on: the last selected size is automatically selected again

Residual heat indicator

The hob has a two-stage residual heat indicator for each
hotplate.
If • appears in the display the hob is still hot. It may be used,
for example, to keep a small meal warm or to melt cooking
chocolate. As the hotplate cools down further, the display
changes to œ. The display remains lit until the hotplate has
cooled sufficiently.
28
Activating and deactivating
Select the hotplate and touch the ó symbol
Select the hotplate and touch the ó symbol
Use the residual heat of the hob. For longer cooking times,
■
you can switch the hotplate off 5-10 minutes before the end
of the cooking time.
Controls
Hotplate selection
¡
Adjustment fields
A @
Automatic zone control
ó
Notes
When you touch a symbol, the respective function is
■
activated.
Always keep the controls dry. Moisture reduces their
■
effectiveness.
Do not pull pans close to the displays and sensors. The
■
electronics could overheat.