Monacor HDMI-201 Mode D'emploi page 9

3) As soon as a player is switched on, the HDMI-201 automatically
switches to the unit switched on and the corresponding indication
of the HDMI-201 lights up.
4) If both players are switched on, it is possible to switch between the
units with the button "Select".
5) If the switcher is not used for a longer period of time, disconnect
the power supply unit from the socket, otherwise a low current will
permanently be consumed.
4 Specifications
Input jacks and output jacks: HDMI jack, type A, 19-pole
Power supply: . . . . . . . . . . . 5 V via connected HDMI unit or sup-
Dimensions: . . . . . . . . . . . . 87 mm × 18 mm × 45 mm
Weight: . . . . . . . . . . . . . . . . 142 g
Subject to technical modifications.
All rights reserved by MONACOR
No part of this instruction manual may be reproduced in any form or by any
means for any commercial use.
plied power supply unit connected to
100 – 240 V~/ 50 – 60 Hz/ 20 VA
® INTERNATIONAL GmbH & Co. KG.
GB
9