Connection And Operation - Monacor HDMI-201 Mode D'emploi

GB 3. malfunctions occur.
The units must in any case be repaired by skilled personnel.
G
For cleaning only use a dry, soft cloth, never use chemicals or
water.
G
No guarantee claims for the units and no liability for any resulting
personal damage or material damage will be accepted if the units
are used for other purposes than originally intended, if they are not
correctly connected or operated, or not repaired in an expert way.
If the units are to be put out of operation definitively, take
them to a local recycling plant for a disposal which is not
harmful to the environment.

3 Connection and Operation

1) Connect the players to the jacks "HDMI Input 1" and "HDMI
Input 2" and the reproducer to the jack "HDMI Output" – see figure
on page 3.
2) For long HDMI cables (longer than 5 m) connect the supplied
power supply unit to the jack "DC 5 V" and to a socket (100 – 240 V~/
50 Hz). For short cables the power can be supplied via one of the
connected units (to be tested, if required).
8