Table des Matières
Publicité
U S E R M A N U A L
TECHNICAL DATA
Parameter
Parameter value
description
Product name
Geared trolley
Model
SBS-
SBS-
GT-500
GT-1000
Maximum load
500
1,000
[kg]
Safety factor (for
1.25
maximum load)
Wheel spacing
70-170
80-200
[mm]
Dimensions [mm]
285x230x220
Weight [kg]
4,85
7.5
Product name
Geared trolley
Model
SBS-RT-2000
SBS-RT-1000
Maximum load
2,000
[kg]
Safety factor (for
1.25
maximum load)
Wheel spacing
105-160
[mm]
EN
Dimensions [mm]
260x230x255
270x190x235
Weight [kg]
9.65
1. GENERAL DESCRIPTION
The user manual is designed to assist in the safe and
trouble-free use of the device. The product is designed and
manufactured in accordance with strict technical guidelines,
using state-of-the-art technologies and components.
Additionally, it is produced in compliance with the most
stringent quality standards.
DO NOT USE THE DEVICE UNLESS YOU HAVE
THOROUGHLY READ AND UNDERSTOOD THIS
USER MANUAL.
To increase the product life of the device and to ensure
trouble-free operation, use it in accordance with this user
manual and regularly perform maintenance tasks. The
technical data and specifications in this user manual are
up to date. The manufacturer reserves the right to make
changes associated with quality improvement.
LEGEND
The product satisfies the relevant safety
standards.
Read instructions before use.
The product must be recycled.
WARNING! or CAUTION! or REMEMBER!
Applicable to the given situation (general
warning sign).
Rev. 12.07.2019
Wear protective goggles.
Wear protective gloves.
Wear head protection.
SBS-
ATTENTION! Hand crush hazard!
GT-2000
ATTENTION! Suspended weight!
2,000
PLEASE NOTE! Drawings in this manual are for
illustration purposes only and in some details, it may
differ from the actual product.
The original operation manual is in German. Other
110-220
language versions are translations from German.
2. USAGE SAFETY
305x260
ATTENTION! Read all safety warnings and all
x230
instructions. Failure to follow the warnings and
11.5
instructions may result in serious injury or even
death.
The term „machine", „device" or „product" in the warnings
and in descriptions in this manual refers to the < geared
trolley >. Do not put your hands or other items inside the
1,000
device while it is in use!
2.1. SAFETY IN THE WORKPLACE
a)
Make sure the workplace is clean and well lit. A messy
or poorly lit workplace may lead to accidents. Try
to think ahead, observe what is going on and use
77-133
common sense when working with the device.
b)
In case of any damage or malfunction of the device,
immediately stop using it and immediately report the
situation to the authorized person.
9.5
c)
If there are any doubts as to the correct operation
of the device, contact the manufacturer's support
service.
d)
Only the manufacturer's service point may repair the
device. Do not attempt any repairs independently!
e)
Children or unauthorised persons are forbidden to
enter a work station. (A distraction may result in loss
of control over the device).
f)
Regularly inspect the condition of the safety labels. If
the labels are illegible, they must be replaced.
g)
Please keep this manual available for future reference.
If this device is passed on to a third party, the manual
must be passed on with it.
h)
Keep packaging elements and small assembly parts in
a place not available to children.
i)
Keep the device away from children and animals.
j)
If this device is used together with another equipment,
the remaining instructions for use shall also be
followed.
REMEMBER! When using the device, protect
children and other bystanders.
2.2 PERSONAL SAFETY
a)
Do not use the device when tired, ill or under the
influence of alcohol, narcotics or medication which
can significantly impair the ability to operate the
device.
b)
The device is not designed to be handled by persons
(including children) with limited mental and sensory
functions or persons lacking relevant experience and/
or knowledge unless they are supervised by a person
responsible for their safety or they have received
instruction on how to operate the device.
6
c)
The device can be handled only by physically fit
persons who are capable of handling it, properly
trained, familiar with this manual and trained within
the scope of occupational health and safety.
d)
When working with the device, use common sense
and stay alert. Temporary loss of concentration while
using the device may lead to serious injuries.
e)
Use personal protective equipment as required
for working with the device, specified in section 1
(Legend). The use of correct and approved personal
protective equipment reduces the risk of injury.
f)
Do not overestimate your abilities. When using the
device, keep your balance and remain stable at all
times. This will ensure better control over the device
in unexpected situations.
g)
Do not wear loose clothing or jewellery. Keep hair,
clothes and gloves away from moving parts. Loose
clothing, jewellery or long hair may get caught in
moving parts.
h)
Remove all adjusting tools or spanners before turning
the device on. A tool or spanner left in the revolving
part of the device may cause injury.
i)
The device is not a toy. Children must be supervised
to ensure that they do not play with the device.
2.3 SAFE DEVICE USE
a)
Do not overload the device. Use the appropriate tools
for the given task. A correctly-selected device will
perform the task for which it was designed better and
in a safer manner.
b)
When not in use, store in a safe place, away from
children and people not familiar with the device who
have not read the user manual. The device may pose
a hazard in the hands of inexperienced users.
c)
Keep the device in perfect technical condition. Before
each use check for general damage and especially
check for cracked parts or elements and for any other
conditions which may impact the safe operation of
the device. If damage is discovered, hand over the
device for repair before use.
d)
Keep the device out of the reach of children.
e)
Device repair or maintenance should be carried out
by qualified persons, only using original spare parts.
This will ensure safe use.
f)
To ensure the operational integrity of the device, do
not remove factory-fitted guards and do not loosen
any screws.
g)
Avoid situations where the device stops working
during use due to excessive loading. This may result
in overheating of the drive elements and damage to
the device.
h)
Do not move, adjust or rotate the device in the course
of work.
i)
Clean the device regularly to prevent stubborn grime
from accumulating.
j)
The device is not a toy. Cleaning and maintenance may
not be carried out by children without supervision by
an adult person.
k)
It is forbidden to interfere with the structure of
the device in order to change its parameters or
construction.
l)
Keep the device away from sources of fire and heat.
m)
It is forbidden to use the device for carrying weights
exceeding the maximum load.
n)
No person or animal is allowed under suspended
loads.
o)
It is forbidden to transport any load using the device
over people or animals.
p)
It is forbidden to transport people or animals using
this device.
q)
It is forbidden to use excessive force or jerk the chain
if a resistance is encountered (for the SBS-RT-1000
model).
r)
When the machine is in use, it is forbidden to pull the
chains in any direction other than along the runway.
Sideways pulling may cause damage to the machine
(for the SBS-RT-1000 model).
s)
Avoid shocks, impacts and sudden changes in speed
during transportation using the device. That will
reduce the risk of the load falling from a height.
t)
Before suspending the load, always make sure that
the space in which it will be transported is free of
obstructions
u)
Any third persons should be warned of the work of the
machine and should stay at a safe distance from the
load.
v)
Always pay attention to the load.
w)
Do not leave a hanging load unattended.
x)
Avoid situations in which the load could swing.
y)
Do not conduct mechanical or similar works (welding,
cutting, etc.) on a hanging load.
z)
Make sure that the load is stably and correctly
attached to the lifting ring.
aa)
Fall of the load may result in injury or death.
bb)
Do not use the device in an aviation industry.
ATTENTION! Despite the safe design of the device
and its protective features, and despite the use of
additional elements protecting the operator, there is
still a slight risk of accident or injury when using the
device. Stay alert and use common sense when using
the device.
3. USE GUIDELINES
The machine is designed to transport loads on a monorail
track. It can be used as a suspension point for lifting
equipment.
The user is liable for any damage resulting from
unintended use of the device.
3.1. DEVICE DESCRIPTION
SBS-GT-500, SBS-GT-1000, SBS-GT-2000, SBS-RT-2000
1
2
3
8
7
6
5
4
7
Rev. 12.07.2019
EN
Publicité
Table des Matières
