Description Of Symbols - Silverline 631320 Mode D'emploi

GB

Description of Symbols

The rating plate on your tool may show symbols. These represent
important information about the product or instructions on its use.
Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Wear hand protection
Read instruction Manual
Class II construction
(double insulated for additional protection)
Caution!
Conforms to relevant legislation and safety standards
Environmental Protection
Waste electrical products should not be disposed of
with household waste. Please recycle where facilities
exist. Check with your local authority or retailer for
recycling advice
Technical Abbreviations Key
V
~, AC
A, mA
Ah
n0
n
Nm
°
Ø
Hz
, DC
W, kW
/min or min
-1
rpm
F
dB(A)
m/s
2
4
Volts
Alternating current
Ampere, milli-Amp
Amp hours (battery capacity)
No load speed
Rated speed
Newton metres (torque)
Degrees
Diameter
Hertz
Direct current
Watt, kilowatt
Operations per minute
Revolutions per minute
Farad (capacitance)
Decibel sound level (A weighted)
Metres per second squared (vibration magnitude)
Original Instructions
Specification
Voltage: ............................................................. 230-240V~ 50Hz
Power: ................................................................................ 810W
No load speed: ............................................................. 250m/min
Belt size (W x L): ...................................................... 76 x 533mm
Power cord length: .............................................................. 1.8m
Protection class: ...................................................................
Weight: ................................................................................2,9kg
Sound and vibration information:
Sound Pressure L :........................................................ 101dB(A)
PA
Sound Power L : ............................................................. 90dB(A)
WA
Uncertainty K: ........................................................................ 3dB
Weighted vibration a (main handle): ............................ 4.135m/s
h
The sound intensity level for the operator may exceed 85dB(A) and
sound protection measures are necessary
As part of our ongoing product development, specifications of
Silverline products may alter without notice
WARNING: Always wear ear protection where the sound level exceeds
85dB(A) and limit the time of exposure if necessary. If sound levels are
uncomfortable, even with ear protection, stop using the tool immediately
and check the ear protection is correctly fitted and provides the correct level
of sound attenuation for the level of sound produced by your tool.
WARNING: User exposure to tool vibration can result in loss of sense of
touch, numbness, tingling and reduced ability to grip. Long term exposure
can lead to a chronic condition. If necessary, limit the length of time
exposed to vibration and use anti-vibration gloves. Do not operate the tool
with hands below a normal comfortable temperature, as vibration will have
a greater effect. Use the figures provided in the specification relating to
vibration to calculate the duration and frequency of operating the tool.
Sound and vibration levels in the specification are determined according
to EN60745 or similar international standards. The figures represent
normal use for the tool in normal working conditions. A poorly maintained,
incorrectly assembled, or misused tool, may produce increased levels of
noise and vibration. www.osha.europa.eu provides information on sound
and vibration levels in the workplace that may be useful to domestic users
who use tools for long periods of time.
General Safety
WARNING Read all safety warnings and all instructions. Failure to
follow the warnings and instructions may result in electric shock, fire and/
or serious injury.
WARNING: This appliance is not intended for use by persons (including
children) with reduced, physical or mental capabilities or lack of
experience or knowledge unless they have been given supervision or
instruction concerning use of the appliance by a person responsible
for their safety. Children must be supervised to ensure that they do not
play with the appliance.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-operated
(corded) power tool or battery-operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit. Cluttered or dark areas invite
accidents.
b) Do not operate power tools in explosive atmospheres, such as in
the presence of flammable liquids, gases or dust. Power tools create
sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control.
2