Maintenance - Technical Data - Quick CHC1203 Manuel De L'utilisateur

MAINTENANCE
The chain counter does not require any particular maintenance. To assure top performance, check the cables and electri-
cal connections once a year.
Clean the chain counter with a soft rag dampened in water. Do not use chemicals or harsh products to clean the chain
counter.
TECHNICAL DATA
MODEL
OUTPUT CHARACTERISTICS
UP/DOWN contacts current
INPUT CHARACTERISTICS
Supply voltage (1)
Current absorbed when idling (2)
Maximum current absorbed (3)
AMBIENT CHARACTERISTICS
Operating temperature (4)
Degree of protection
GENERAL CHARACTERISTICS
Communication interface
External connections
Weight
EMC class
(1) The chain counter can reset itself if the voltage is less than 9 Vdc.
(2) Typical value with back-lighting off and windlass not on.
(3) Typical value with back-lighting on at highest level and windlass on.
(4) With temperatures below 0°C the crystals in the LCD slow down.
DIMENSIONS - mm (inch)
CHC1203 CHAIN COUNTER
102 (4" 1/64)
®
QUICK RESERVES THE RIGHT TO MODIFY THE TECHNICAL CHARACTERISTICS OF THE EQUIPMENT AND THE CONTENTS OF THIS MANUAL WITHOUT PRIOR NOTICE.
CHC1203 IT EN FR - REV001A

MAINTENANCE - TECHNICAL DATA

32 mA @ 12V - 17 mA @ 24 V
70 mA + current used by solenoid unit
CAN BUS with differential transceiver
Male, M12, code A, 5 poles per CAN bus
Female, M12, code A, 5 poles per POWER & I/O
EN 60945 - FCC Part 15 Rules 47
18,5 (47/64)
33,3 (1" 5/16)
CHC1203
4A max
47 mA
from -20 to +70 °C
IP 67
180 g (260 g with cover)
COVER
106 (4" 11/64)
EN
20,3 (51/64)
30,3 (1" 3/16)
35