Quick CHC1203 Manuel De L'utilisateur page 27

SETTINGS
COUNTER RESET
FUNCTIONS
PERSONAL SET
LANGUAGE
CALIBRATION
AUTO CALIBRATE
DATA ITEM
COUNTER RESET
FUNCTIONS
PERSONAL SET
LANGUAGE
CALIBRATION
AUTO CALIBRATE
UTILITY
CAN CONFIG
EXIT
THE STRUCTURE
OF THE MENUS:
CHC1203 IT EN FR - REV001A
SETTING THE CHAIN COUNTER
The chain counter has a several functions that can be personalized to satisfy user's
requirements. To go to the setting menu, press and release key
more than 3 seconds.
As soon as the key is released a window similar to the one shown below is
displayed:
p
Use keys and
change the parameters.
The data item that has been currently selected appears in REVERSE.
=
Use key (SELECT) to confirm the option or the parameter selected.
The following data items are provided on the settings menu, with the MASTER chain
counter present on the network:
SYNTHETIC DESCRIPTION
Reset of the measure of chain lowered.
Automatic down and up alarm setting.
Chain counter personalization: contrast, back-lighting, light delay, key beep, timed locking of the
p and q (UP and DOWN) keys.
Language used for system messages
Chain counter calibration: setting of the measurement unit, of the number of magnets installed, of the
gypsy lap on the gypsy and management of the windlass with free fall.
Automatic chain counter calibration.
Various chain counter controls.
MASTER/SLAVE setting if more than one chain counter is used.
Chain counter set-up menu exit.
COUNTER RESET
FUNCTIONS
PERSONAL SET
LANGUAGE
CALIBRATION
AUTO CALIBRATE
UTILITY
CAN CONFIG
EXIT
SETTING THE CHAIN COUNTER
q
(UP and DOWN) to select the data items within the menu and to
UP ALARM
AUTO DOWN
CONTRAST
LIGHT DELAY
LOCKED KEYS
SET MEASURE
GYPSY LAP
MAGNETS NUMBER
FREE FALL
SENSOR TEST
SW VERSION
SET DEFAULT
CHECK FLASH
CHECK EEPROM
CAN MESSAGE
LIGHT
KEY BEEP
ENGLISH
ITALIANO
FRANCAIS
DEUTSCH
ESPANOL
LCD TEST
EN
=
(SELECT) for
27