Key To Symbols; Symbols On The Machine; Explanation Of Warning Levels - Husqvarna TS70 Manuel D'utilisation

Symbols on the mac hine
W ARNING! The machine can be a
dangerous tool if used incorrectly or
carelessly, which can cause serious or
fatal injury to the operator or others.
Please read the operator's manual
carefully and make sure you understand the
instructions before using the machine.
Always wear:
• Hearing protection
• Protective goggles or a visor
• Breathing mask
WARNING! Keep your hands and feet away
from the blade.
WARNING! Never cut without using the
blade guard.
WARNING! Dust forms when cutting, this
can cause injuries if inhaled. Use an
approved breathing mask. Avoid inhaling
exhaust fumes. Always provide for good
ventilation.
WARNING! Sparks from the cutting blade
can cause fire in combustible materials
such as: petrol (gas), wood, clothes, dry
grass etc.
WARNING! Ensure the blades are not
cracked or damaged in any other way.
WARNING! Do not use circular saw blades
Use no hooks to lift the tile saw.
Motor temperature
Reset the overload protector
Lock function
En vironmental marking. Symbols on the
product or its packaging indicate that this
product cannot be handled as domestic
waste. It must instead be submitted to an
appropriate recycling station for the recovery
of electrical and electronic equipment.
By ensuring that this product is taken care of correctly, you
can help to counteract the potential negative impact on the
environment and people that can otherwise result through
the incorrect waste management of this product.
2 – English
KEY T O SYMBOLS
For more detailed information about recycling this product,
contact your municipality, your domestic waste service or
the shop from where you purchased the product.
Other symbols/decals on the mac hine refer to special
certification requirements for certain markets.
Explanation of warning le vels
The w arnings are graded in three levels.
W ARNING!
CAUTION!
NOTICE!
NO TICE! Used if there is a risk of damage to materials
or the machine if the instructions in the manual are not
followed.
Serial No.: 2000 W 115/230 V
Model: 60 Hz 20/9 A
Art. No.:
CSA/UL 60745-1
CSA UL 60745-02-05
4005474
HUSQVARNA AB HUSKVARNA, SWEDEN, MADE IN CHINA
W ARNING! Used if there is a risk of
!
serious injury or death for the operator
or damage to the surroundings if the
instructions in the manual are not
followed.
CA UTION! Used if there is a risk of injury
!
to the operator or damage to the
surroundings if the instructions in the
manual are not followed.