HIKOKI N 14DSL Mode D'emploi page 17

b) Use power tools
designated battery packs.
Use of any other battery packs may create a risk of
injury and fi re.
c) When battery pack is not in use, keep it away
from other metal objects like paper clips,
coins, keys, nails, screws, or other small metal
objects that can make a connection from one
terminal to another.
Shorting the battery terminals together may cause
burns or a fi re.
d) Under abusive conditions, liquid may be
ejected from the battery; avoid contact. If
contact accidentally occurs, fl ush with water. If
liquid contacts eyes, additionally seek medical
help.
Liquid ejected from the battery may cause irritation
or burns.
6) Service
a) Have your power tool serviced by a qualifi ed repair
person using only identical replacement parts.
This will ensure that the safety of the power tool is
maintained.
PRECAUTION
Keep children and infi rm persons away.
When not in use, tools should be stored out of reach
of children and infi rm persons.
CORDLESS STAPLER SAFETY
WARNINGS
1. Always assume that the tool contains fasteners.
Careless handling of the stapler can result in
unexpected fi ring of fasteners and personal injury.
2. Do not point the tool towards yourself or anyone
nearby.
Unexpected triggering will discharge the fastener
causing an injury.
3. Do not actuate the tool unless the tool is placed
fi rmly against the workpiece.
If the tool is not contact with the workpiece, the fastener
may be defl ected away from your target.
4. Disconnect the tool from the power source when
the fastener jams in the tool.
While removing a jammed fastener, the stapler may be
accidentally activated if it is plugged in.
5. Use caution while removing a jammed fastener.
The mechanism may be under compression and the
fastener may be forcefully discharged while attempting
to free a jammed condition.
6. Do not use this stapler for fastening electrical
cables.
It is not designed for electric cable installation and
may damage the insulation of electric cables thereby
causing electric shock or fi re hazards.
PRECAUTIONS ON USING
CORDLESS STAPLER
1. Safe operation through correct usage.
This tool was designed for driving staples into wood
and similar materials. Use it for its intended purpose
only.
2. Be careful of ignition and explosions.
Since sparks may fl y during stapling, it is dangerous
to use this tool near lacquer, paint, benzine, thinner,
gasoline, gas, adhesives and similar infl ammable
substances as they may ignite or explode. Under no
circumstances should this tool therefore be used in the
vicinity of such infl ammable material.
only with specifi cally 3. Always wear eye protection (protective goggles).
When operating the power tool, always wear eye
protection, and ensure that surrounding people wear
eye protection too.
The possibility of fragments of staples or staples that
were not properly hit entering the eye is a threat to
sight. Eye protection can be bought at any hardware
store. Always wear eye protection while operating this
tool. Use either eye protection or a wide vision mask
over prescription glasses.
Employers should always enforce the use of eye
protection equipment.
4. Protect your ears and head.
When engaged in stapling work please wear ear
muffl ers and head protection. Also, depending on
condition, ensure that surrounding people also wear
ear muffl ers and head protection.
5. Pay attention to those working close to you.
It would be very dangerous if staples that were not
properly driven in should hit other people. Therefore,
always pay attention to the safety of the people around
you when using this tool. Always make sure that
nobody's body, hands or feet are close to the staple
outlet.
6. Never point the staple outlet towards people.
Always assume the tool contains fasteners.
If the staple outlet is pointed towards people, serious
accidents may be caused if you mistakenly discharge
the tool. When connecting and check disconnecting
the battery, during staple loading or similar operations,
be sure the staple outlet is not pointed towards anyone
(including yourself). Even when no staples are loaded
at all, it is dangerous to discharge the tool while
pointing it at someone, so never attempt to do so. No
horseplay. Respect the tool as a working implement.
7. Before using the power tool, check the push lever.
Before using the power tool, make sure to check that
the push lever operate properly. Without staples loaded
into the power tool, connect the battery and check
the following. If the sound of operations occurs this
indicates a fault, so in such a case do not use the power
tool until it has been inspected and repaired.
○ If merely pulling the trigger causes operating sound
of drive bit movement occur, the power tool is faulty.
○ If merely pushing the push lever against the
material to be stapled causes the sound of drive
bit movement to occur, the power tool is faulty.
Furthermore, with regard to the push lever, please
note that it must never be modifi ed or removed.
8. Use specifi ed staples only.
Never use staples other than those specifi ed and
described in these instructions.
9. Do not carelessly place your fi nger on the trigger.
Do not place your fi nger on the trigger except when
actually stapling. If you carry this tool or hand it to
someone while having your fi nger on the trigger, you
may inadvertently discharge a staple and thus cause
an accident.
10. Completely Close the blade guide and do not open
it during operation.
If stapling is attempted when the blade guide is open,
staples will not be driven into the timber, and there is a
risk of dangerous discharge.
11. Press the staple outlet fi rmly against the material
to be stapled.
When driving in staples, press the staple outlet fi rmly
against the material to be stapled. If the outlet is not applied
properly, the staples may rebound.
12. Keep hands and feet away from the fi ring head
when using.
It is very dangerous for a staple to hit the hands or feet
by mistake.
17
English