General Information; Hase Kaminofenbau Gmbh - HASE Sendai Pro 135 Manuel D'utilisation

Contents
1. General Information
1.1 Definition of Safety Notes
2. Control Elements
3. Safety Distances
4. Connection of Multiple Devices in
Direct Vent Operation for Sendai Pro
5. Fuel Load Sizes and Thermal Output
5.1 Wood Briquettes
6. Initial Operation
7. Lighting the Fire
8. Adding Fuel / Heating at Nominal
Thermal Output
9. Heating at Low Thermal Output
(during Transitional Seasons)
10. Emptying the Ash Drawer
11. Technical Data Sendai Pro
Annex
Product data sheet
Type labels
DIBt conformity mark Sendai Pro
Energy efficiency label
Page 1.

General Information

43 This section contains important information on using
43 this technical documentation. Utmost care was tak-
44 en in preparing this document. Nevertheless, sug-
45 gestions for improvement and comments regarding
any errors are always welcome.
46
46 © Hase Kaminofenbau GmbH
46
1.1 Definition of Safety Notes
46
47
WARNING!
This symbol alerts you to a potentially
47
hazardous situation. Non-compliance with
48 this warning can cause severe injuries, or
even death.
48
49
CAUTION!
This symbol alerts you to a potentially
hazardous situation. Non-compliance can
cause damage to property or injuries to
104 persons.
106
106 NOTE!
107 Provides additional tips about using the
stove as well as useful information.
ENVIRONMENT!
Sections marked with this symbol provide
information about safe and environmen-
tally-friendly operation as well as environ-
mental laws and regulations.
GB
43