Playing A Preset Radio Station; Fm Settings Menu; Rds Broadcast Reception; Rds Button G - Rotel T14 Manuel De L'utilisateur

English

Playing a preset radio station

Anytime you are on the FM source you can select a preset station for listening.
3 D
1. From the numeric keypad
station.
2. Press the PRESET +/- H buttons on the remote control to display preset
numbers. Press the up/down
buttons on the remote control or turn the knob
select the desired station, then press the PUSH SELECT
panel or the ENT button on the remote control . Press the FM
again to exit the preset menu and go back to playing status.

FM Settings Menu

= I
Press the FM button and toggle to the FM settings Menu. There are
3 sub-menus under FM setting.
• SCAN SETTINGS: Select between ALL STATION or STRONG STATIONS
ONLY.
FM SETUP
> STRONG STATIONS ONLY
ALL STATIONS
• AUDIO SETTINGS: Select "STEREO OR MONO" or "MONO ONLY".
FM SETUP
> STEREO OR MONO *
MONO ONLY
• FM PRESET: Display all 30 of the FM preset stations and allows tuning to
the selected preset by pressing the PUSH SELECT
or the ENT button on the remote control.
To make changes in the FM settings menu, turn the PUSH SELECT knob
on the front panel or the up/down arrow buttons on the remote control. To
save a change, press the PUSH SELECT knob
ENT button on the remote control.

RDS Broadcast Reception

This Rotel unit is equipped with RDS (Radio Data Systems) reception
capabilities. The RDS broadcast system provides additional functionality
to FM radio reception by transmitting encoded information along with the
radio signal. This signal is decoded by an RDS receiver and can provide
a range of informational features including:
1. A display of the station's identifying name (e.g. BBC1).
2. A display of the station's program content (e.g. ROCK or NEWS).
3. Traffic information broadcasts.
4. A scrolling text display for announcements or information.
5. Current time and date.
RDS broadcasting has been widely available in many European markets
for years. There are a large number of RDS stations and most users will be
familiar with the features and operation.
, press the preset number of the desired
B arrow buttons or the PRESET +/-
8
on the front panel to
8
on the front
= I
*
8 on the front panel
8 on the front panel or the
NOTE: The RDS features are entirely dependent on the broadcaster
sending properly encoded signals. Thus, they will only be available in
markets where RDS is currently implemented and where stations are
broadcasting these data signals.

RDS Button G

The RDS button on the remote control can step through the various displays.
H Press the RDS button on the remote control to step through the following
displays.
button 1. Radio Text.
2. Name of station.
3. PTY.
4. Today's date and current time.

MONO Button G

The MONO button on the remote control changes the FM mode from stereo
reception to mono reception. In stereo mode, a stereo signal will be heard
if the station is broadcasting a stereo signal and there is sufficient signal
strength.
NOTE: Switching to mono mode can be a useful way to improve the
reception of weak or distant FM signals. Less signal strength is required
for clean mono reception than for stereo reception.

DAB and DAB+ RADIO

NOTE: Make sure that your local area can receive Digital Audio
Broadcast (DAB or DAB+) broadcasting signal.
Press the DAB q button on the front of the panel, or remote
DAB channels are categorized into ensembles, which are also known as
8 multiplexes. Each multiplex provides a number of stations and each service
contains a primary service that can contain secondary services. DAB
technology allows broadcasters to transmit additional data along with the
audio, which can include other audio channels, text and even images and
computer data in the future.

DAB Radio Station Playing

1. Select the DAB Button from the front panel or the remote control and
the unit will scan for available stations. After scanning you will see the
following menu.
Station List
> BBC 1
BBC 2
2. Turn the PUSH SELECT knob
arrow buttons on the remote control to see available stations and press
the PUSH SELECT knob
remote control to select.

Storing a DAB station in a preset

While a DAB station is playing, push the memory button
the 2 digit preset number where you want to save this station on the numeric
keypad 3 D . Up to 30 preset DAB radio stations may be stored.
8
on the front panel or use the up/down
8
on the front panel or the ENT button on the
9 E
13
M .
, then enter