Before First Use; Daily Use - IKEA FRAMTID OV9 Mode D'emploi

Masquer les pouces Voir aussi pour FRAMTID OV9:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

ENGLISH
Oven accessories
Dripping pan
1x
Push-pull control knobs

Before first use

Remove all packaging, both inside and
outside the oven, before using the appli-
ance. Do not remove the rating plate.
When you connect the appliance to the elec-
trical supply or in case of a power cut, the
Time function indicator flashes automatically.
To set the current time use "+" or "-" button.
After approx. 5 seconds the flashing stops
and the clock displays the time of the day set.
If the time of the day is not set the appliance
does not work.
Initial cleaning
Clean the appliance before first use. Clean
the accessories and the oven interior with a
soft cloth with warm water and soap.

Daily use

Switching the appliance on
Set the oven function and the temperature.
Baking tray
1x
Grid
1x
The oven is provided with push-pull control
knobs. You can sunk the push-pull control
knobs inside the control panel when the oven
is off.
Turn the push-pull control knobs clockwise to
set the temperature and the oven function.
After that preheat the oven up without food.
Preheating
Turn the oven function control knob to
run the oven for 45 minutes at maximum tem-
perature, to burn off any residue from the
cavity surface. Accessories can become hot-
ter than in normal use. During this period an
odour can be emitted. This is normal. Make
sure the room is well ventilated.
Setting the oven function
Turn the control knob for oven functions (refer
to "Product description").
Meat probe
1x
6
and

Publicité

Table des Matières
loading

Table des Matières