Husqvarna FS 305 Manuel D'utilisation page 9

MANDATORY
WARNING
These signs give advice
concerning your safety
Instruction plate
A
D
B
C
A: Manufacturing date, year, week, serial
number.
B: Maximum blade diameter.
C: Maximum blade shaft speed.
D: Nominal engine power (as rated by the
engine manufacturer).
SPECIAL INSTRUCTIONS
The flat saw is designed to provide safe and
reliable service in operating conditions
corresponding with the instructions, but it
can present dangers for the user and risks
of damage, consequently regular on site
inspection is necessary to ensure:
• Perfect technical condition (use for
the purpose for which it is intended
and taking into account any risks, and
correction of any malfunction
detrimental to safety).
• Use a diamond disk for cutting with
water (sawing new or old concrete,
tarmac or asphalt). No other type of
disk is allowed (abrasive, saw, etc...).
• Competent staff (qualifications, age,
training) who have read and
understood the manual in detail
before starting work: any electrical,
mechanical or other problem should
be investigated by a qualified
maintenance engineer (electrician,
maintenance manager, approved
dealer, etc . . .).
• That the warnings and instructions
marked on the machine are followed
(adequate personal protection,
correct use, general safety
instructions, etc).
• That no modification, transformation
or addition is detrimental to safety
and that it is carried out without prior
authorization from the manufacturer.
• Respect of the maintenance intervals
and periodical checks recommended.
• That only genuine spare parts are
used for repairs.
FAILURE TO COMPLY WITH
INDICATION
INFORMATION
THESE WARNINGS COULD
INSTRUCTION
RESULT IN DEATH OR SERIOUS
BODILY INJURY.
PROHIBITION
DO carefully read and understand all the
instructions before operating the saw.
DO always keep all guards in place.
DO always wear safety approved hearing,
eye, head and respiratory protection.
DO keep all parts of your body away from
the blade and all other moving parts.
DO know how to stop the saw quickly in
case of an emergency.
DO shut off the engine and allow it to cool
before refueling.
DO inspect the blade, flanges and shafts
for damage before installing the
blade.
DO use only blades marked with a
maximum operating speed greater
than the blade shaft speed.
DO use caution
instructions when loading and
unloading the saw.
DO NOT allow other persons to be near
the saw when starting, refueling
or when cutting.
DO NOT operate gasoline engines in an
enclosed area unless it is
properly vented.
DO NOT use damaged equipment or
blades.
DO NOT operate the saw in areas of
combustible material. Sparks
from the saw could cause a fire
or an explosion.
DO NOT allow blade exposure from the
guard to be over 180 degrees.
DO NOT leave the saw unattended with
the engine running.
DO NOT operate the saw while under the
influence of drugs or alcohol.
DO
and follow the
DO NOT
1 Use
• Utilisation : sawing with sprinkling of
fresh, old or coated (asphalt) concrete.
• T o o l s : Water-cooled
impregnated discs - Øx350 mm - bore
25.4 mm.
(Details from your usual supplier).
2 Description of the machine [FIG. 1]
11. Handle
12. Engine stop
13. Lowering handwheel
14. Graduated scale
15. Engine
16. Engine oil drain
17. Front guide
18. Belt cover
19. Disk casing
10. Service spanner
11. Water intake tap
12. Lifting eye
3 Handling - Transport
Stop the blade prior to moving the
machine on jobsite. Use the machine
stop.
Remove the disk prior to hoisting,
loading, unloading and transporting
the machine on jobsite.
Use lifting eye (12) for lifting, see
fig. 1
Height of adjustable handlebars (unscrew the
lever (M) adjust height settings for best
ergonomic position ) [SEE FIG. 2].
• The flatsaw only needs pushing to
move it into position on the site. It is easy
to move on its four wheels, without
starting the engine.
• The handwheel (K) locks the machine
itself in the high position.
• Light weight, compact, transportable in a
.
vehicle.
diamond-
4