Installation Instructions
Please Read the Manual Carefully Before Installation
screw
trim-kit plastic cover
Please Note:
Electrical connection
EThe oven is fi tted with a plug and must be only connected to a properly installed earthed socket. In accordance with
the appropriate regulations, the socket must only be installed and the connecting cable must only be replaced by a
qualifi ed electrician.
If the plug is no longer accessible following installation and all-pole isolating switch must be present on the
installation side with a contact gap of at least 3mm.
A. Built-in furniture
The built-in cabinet shall not have a rear wall behind the appliance. Minimum installation height is 85cm.
Do not cover ventilation slots and air intake points.